S.no	Title of the Paper	Name of the authors	Title of the journal	Year
1	Efficiency enhancement of solar PV panel by incorporating wickless loop heat pipes with plate type evaporator	Nethaji N, Kumar RS, Jayanthi N, Murali G, Elumalai PV, Murugan M, Prabhakar S, Zhang J.	Scientific Reports	2025
2	Study of thermal performance and melting behaviour of a novel paraffin wax-carbon quantum Dots PCMs	Murali G.Emeema J, Reddi, B. Venkateswara, Masthan Vali P.S.N., Elumalai P.V., Murugan M., Alwetaishi, Mamdooh, Ramu, T. Bhargava, Prabhakar S	Scientific Report	2025
3	Synthesis and Characterization of Paraffin Wax-Based Composite Phase Change Materials With Improved Thermal Properties for E-Vehicle BTMS	Masthan Vali P.S.N., Murali G., Kurhade, Anant Sidhappa, Elumalai P.V., Murugan M, Yong X., Prabhakar S.	Energy Science and Engineering	2025
4	Design and Analysis of Industrial Material Handling Systems using FEA and Dynamic Simulation Techniques	Chougule, S.M., Murali, G., Kurhade, A.S.	Journal of Scientific and Industrial Research	2025
5	Comparative study of incoloy 825 mechanical properties and microstructure via FSW with and without carbon nanotubes	Penugonda, V. Govindarajan, M. Bongarala, V.K	Journal of Ceramic Processing Research,	2025
6	Failure Investigation of the Driving Shaft in an Industrial Paddle Mixer	Chougule, S.M., Murali, G., Kurhade, A.S.	Journal of Mines, Metals and Fuels	2025
7	Finite Element Analysis and Design Optimization of a Paddle Mixer Shaft	Chougule, S.M., Murali, G., Kurhade, A.S.	Journal of Mines, Metals and Fuels	2025
8	Enhancing Flat-Plate Solar Collector Efficiency: A Numerical Study.	kurhade AS, Amruth E, Joshi PS, Kondhalkar GE, Jadhav PA, Murali G, Mahajan RG, Waware SY.	Journal of Mines, Metals & Fuels.	2025
9	Simulation-Based Evaluation of Battery Thermal Management Systems for Cylindrical Li-Ion Batteries in Electric Vehicles.	Masthan Vali PS, Murali G, Kurhade AS.	Journal of Mines, Metals & Fuels.	2025
10	Characterization of Microstructure and Mechanical Properties in Incoloy 925 and Inconel 625 Dissimilar Friction Stir Welds	Penugonda V, Murali G, Bongarala VK, Jayasriram T, Kurhade AS.	. Journal of Mines, Metals & Fuels	2025
11	Deep Learning-Based Detection and Classification of Moss and Crack Damage in Rock Structures for Geo-Mechanical Preservation.	Ramani P, Reji V, Sathish Kumar V, Murali G, Kurhade AS.	Journal of Mines, Metals & Fuels	2025
12	Enhancing Heat Transfer in Micro-Channel Heat Sinks through Geometrical Optimization.	Chippalkatti S, Chekuri RB, Ohol SS, Shinde NM, Barmavatu P, Shelkande VD, Murali G, Kurhade AS.	Journal of Mines, Metals & Fuels	2025
13	Biodiesel Blends: A Sustainable Solution for Diesel Engine Performance Improvement.	Kurhade AS, Siraskar GD, Chekuri RB, Murali G, Pawar P, Patil AR, Waware SY, Yadav RS.	Journal of Mines, Metals & Fuels.	2025
14	Investigating the Impact of Oxygenated Additives on Exhaust Emissions from Unleaded Gasoline Vehicles.	Kurhade AS, Siraskar GD, Raut PN, Dolas AS, Murali G, Dalvi SA, Waware SY, Yadav RS.	Journal of Mines, Metals & Fuels	2025
15	Passive Cooling of EV Batteries Using Phase Change Material: A Simulation Study	Kurhade, Anant Sidhappa, Siraskar, Gulab Dattrao, Dalvi Sagar Arjun, Kharat Pallavi Vishnu, Jadhav, Nilesh Ambaji Shelkande, Varsharani Dilip, Murali, Govindarajan, Waware, Shital Yashwant, Yadav, Rahul Shivaji	Journal of Mines, Metals & Fuels.	2025
16	Harnessing the Power of Plastic Waste: A Sustainable Approach to Fuel Production	Kurhade, Anant Sidhapp, Kharat, Pallavi Vishnu, Chougule, Sukhadip Mhankali, Darade, Milind Manikrao, Karad, Madhuri Mohanrao, Murali, Govindarajan, Charwad, Girish Waware, Shital Yashwant Yadav, Rahul Shivaji	Journal of Mines, Metals and Fuels	2025
17	Dynamic simulation and performance evaluation of vibratory bowl feeders integrated with paddle shaft mechanisms	Chougule SM, Murali G, Kurhade AS.	Advances in Science and Technology. Research Journal	2025
18	Green Adsorbents for Heavy Metal Removal: A Study on Zinc Ion Uptake by Tinospora cordifolia Biocarbon	Raut, Prachi Narendra, Dolas, Ashadevi Sopan, Chougule, Sukhadip Mhankali, Darade, Milind Manikrao, Murali, Govindarajan, Waware, Shital Yashwant, Kurhade, Anant Sidhappa	Journal of Mines, Metals and Fuels	2025
19	Turbulence model comparison and optimal geometry identification in trapped vortex combustors: A RANS-based study	Siraskar, G.D., Kurhade, A.S., Murali, G., Arul Prakash, M., Bharathiraja, N., Dharmadhikari, D.D. and Waware, S.Y	International Journal of Modern Physics C	2025
20	Simulation and analysis of heat transfer in counter-flow helical double-pipe heat exchangers using CFD	Kurhade, Anant Sidhappa, Siraskar, Gulab Dattrao, Bhambare, Parimal Sharad, Murali, Govindarajan, Deshpande, Sushil Vijaykumar, Warke, Pushparaj Sunil, Waware, Shital Yashwant	International Journal of Modern Physics C	2025
21	Enhancement in Heat Transfer with Nanofluids in Double-Pipe Heat Exchangers	"Kurhade, Anant Sidhappa, Siraskar, Gulab Dattrao, Darade, Milind Manikrao, Murali, Govindarajan, Katkar, Tejasvini Rahul, Patil, Suhas Prakashrao, Charwad, Girish AnantWaware, Shital Yashwant, Yadav, Rahul Shivaji"	Journal of Mines, Metals and Fuels	2025
22	Integrated Approach to Enhance Vehicle Safety: A Novel Bumper Design with Energy-Absorbing Mechanisms	"Kurhade, Anant Sidhappa, Chougule, Sukhadip Mhankali, Kharat, Pallavi Vishnu, Kondhalkar, Ganesh, Murali, Govindarajan, Raut, Prachi Narendra, Charwad, Girish Anant, Waware, Shital Yashwant, Yadav, Rahul Shivaji	Journal of Mines, Metals and Fuels	2025
23	Reviewing on wire arc additive manufacturing techniques with conventional approaches over literature review, algorithms, features and complications.	Koduru JP, Kumar TV, Mantrala KM.	International Journal of Vehicle Autonomous Systems	2025
24	Efficient Gaussian Sugeno fuzzy vector with bidirectional lucidity network for gas turbine	Surase, Ravindra S, Krishna, K. Rama, Chopade, Ramchandra P	Current Science	2025
25	Efficient Polynomial PID controller and nonlinear autoregressive with Exogenous for increasing the Efficiency of Combined Gas Turbine (CGT) Plant	Surase, Ravindra S, Konijeti Ramakrishna, Chopade, Ramchandra P	Energy	2025
26	Identifying the impact of key parameters on the drying kinetics of onion (Allium cepa L.) slices	Kumar, P. Kiran, Ramakrishna, Konijeti, Vemuri, Sai Akshara, Koneru, Sireesha, Challa, Bandhavi, Atul Singla, Nitin Duklan, Haider Alabdeli	Cogent Engineering	2025
27	Topology optimization and manufacturing of maxillofacial patient specific implant using FEA and AM	Koppunur, Rakesh, Ramakrishna K, Manmadhachary A, Kumar, Dama Kiran, Sridhar V.	Bioprinting	2025
28	Solar drying technologies: Selection criteria, technical feasibility, economic viability, and recent advances for sustainable agricultural practices.	Kiran KP, Ramakrishna K, Abhishek D.	International Food Research Journal	2025
29	Mechanical Properties of Laser Powder Bed Fusion Processed IN718: Taguchi Optimisation and Analysis of Experimental Results.	Reddy KP, Rao BN, Sharma K, Kumar RR, Murty SV.	Lasers in Manufacturing and Materials Processing.	2025
30	Enhancing thermal systems with graphene oxides nanofluids and hybrid optimization in twisted tube heat exchangers.	Bhaskar S, Rao BN.	The European Physical Journal Plus.	2025
31	Remaining Useful Life Prediction Method For Different Types Of Rolling Bearings Based On Bi-Lstm Quantification.	Eknath KG, Diwakar G.	Discontinuity, Nonlinearity, and Complexity.	2025
32	Multi-objective-derived efficient energy saving in multipath routing for mobile ad hoc networks with the modified aquila–firefly heuristic strategy.	Satyanarayana P, Diwakar G, Priyanka Brahmaiah V, Marlin S, Phani Sai Kumar NV, Gopalakrishnan S.	Engineering Optimization.	2025
33	Comprehensive study on the application of Nano Enhanced Phase Change Materials in Battery Thermal Management Systems in Automotive Applications	Ashirwad R. Biswal, Giphin George, V.L. Mangesh	International Journal of Vehicle Structures and Systems	2025
34	Advancements in the production methods and recycling of multilayer plastics with sustainable applications: A comprehensive review.	Alreshidi MA, Yadav KK, Shoba G, Gacem A, V.L.Mangesh, Padmanabhan S, Kumar TV, Fallatah AM, Bhutto JK, Aldosari FM, Alam M, El-Khair MA.	Chemical Engineering Journal.	2025
35	Interaction of a Disaccharide, Lactose With Resorcinol‐Based Acridinedione Dyes in Water: A Combined Study Involving Photophysical, Electrochemical, and Theoretical Approach.	Vinod SM, Sreedevi SM, Krishnan A, Sruthi VP, Rajaraman V, Mangesh VL, Gacem A, Yadav KK, Darwish HW, Perumal T, Rajendran K.	Luminescence.	2025
36	Sulfated zirconia supported on nickel with TBHP for the selective oxidation of veratryl alcohol to veratraldehyde.	Tamizhdurai P, Mangesh VL, Kavitha C, Shoba G, Padmanabhan S, Subbiah G, Gacem A, Shukla NK, Alshehery S, Albakri GS, Alreshidi MA.	Polyhedron	2025
37	Clean energy technology: Hydro-processing of waste tyre pyrolysis oil (WTPO) to diesel fuel in a continuous reactor using Co/SBA-15 catalyst	Tamizhdurai P, Arthi P, Mangesh VL, Krishnan PS, Kumar NS, Saravanan P, Subramani A, Sasikumar P, Alotibi MF, Alreshaidan SB, Abahussain AA.	. Applications in Energy and Combustion Science	2025
38	Catalytic conversion of plastic waste into diesel fuel through pyrolysis and hydroprocessing.	Vedavalli R, Tamizhdurai P, Kavitha C, Mangesh VL, Kumar GS, Saravanan P, Subramani A, Sasikumar P, Kumar NS, Alreshaidan SB, Alromaeh AI.	Process Safety and Environmental Protection	2025
39	Renewable energy from waste plastic: Hydroprocessing of mixed waste plastic to diesel fuel utilizing Fe/Mo-Al2O3 catalyst.	Sujithraj A, Tamizhdurai P, Mangesh VL, Kavitha C, Subramani A, Saravanan P, Nisha P, Sasikumar P, Kumar NS, Alreshaidan SB, Almutairi G.	Process Safety and Environmental Protection.	2025
40	Emerging Roles of Ionic Liquids in Biodiesel: A Review on Catalysis, Process Design, and Recyclability	Jai Ganesh, P. Samal, VL Mangesh et al.	Energy & Fuels	2025
41	Optimization of design for the high precision end mill spindles to improve stability of effective cutting process.	Boddu JR, Kotaiah KR, Chalapathi PV, Shaik JH.	International Journal on Interactive Design and Manufacturing (IJIDeM)	2025
42	Effect of heat input on microstructure and mechanical properties of bimetallic wire arc additive manufacturing of SS304L and ER308L prepared by hybrid manufacturing process	Bhadrakali AS, Sastry DR, Chigilipalli BK, Naik KS, Kakaravada TI, Acharya A, Kumar KL.	International Journal on Interactive Design and Manufacturing (IJIDeM)	2025
43	Design and optimization of an integrated spindle tool system using semi active control for an end-mill.	Raju CT, Hussain SJ, Yedukondalu G, Galal AM.	International Journal on Interactive Design and Manufacturing (IJIDeM)	2025
44	Multi-response optimization of friction stir welding process parameter of AA 5083 with Taguchi-VIKOR approach.	Kolli M, Sunnapu C, Medikondu NR.	Journal of Engineering and Applied Science.	2025
45	Surfactant Influence on Morphology, Optical, Photocatalysis and Magnetic Performance of KBiFe 2 O 5 Nanomaterials Obtained via Sol-Gel Method.	Muni Krishnaiah A, GSS Anjaneya V, Santhosh Kumar R, Subba Rao M, Gnana Kiran M, Medikondu NR, Yarlagadda SR, Ansari AA, Prabhakar V.	Journal of Solid State Science and Technology.	2025
46	Certain investigations on performance analysis of different converter designs for smart micro-grid systems.	Krishnamoorthy N, Hanumanthakari S, Sivasubramanian G, Prabha A, Hemachandu P, Veeramanikandan P, Medikondu NR, Gopinathan R, Anbarasu L.	International Journal of Power Electronics and Drive Systems (IJPEDS)	2025
47	Quantum Computing Approaches to Autonomous Mobile Robots and Multi-Machine Systems: A Perspective on Design Automation.	Jayasri N, Vidyullatha P, Saravanan A, Muthevi AK, Dinakaran KP, Medikondu NR.	Journal of nano and electronic physics	2025
48	Dynamics and Optimization of Physical Processes in Information Systems Using Autonomous Mobile Robots and Multi-Agent Systems.	Jayasri N, Vidyullatha P, Saravanan A, Muthevi AK, Dinakaran KP, Medikondu NR.	Journal of nano and electronic physics	2025
49	Corrosion characteristics of AA 7075 aluminum alloy Joints produced by double-side friction stir welding.	Vernapu KK, Kanchu VD, Sajja RK, Thadivaka R, Tadivaka SR.	Transactions of the Indian Institute of Metals.	2025
50	Microstructural Analysis, Tribological, and Corrosion Behavior of Nix-Tiy Alloys Deposited Using µ-Plasma Additive Manufacturing Process.	Bankar PS, Rao PK, Sawant MS, Kumar P, Arya PK, Jain NK.	Journal of Materials Engineering and Performance.	2025
51	A characterization study on toughening vinyl ester composites using annealed vinyl silane functionalized biosilica from foxtail millet husk and nettle fibre.	Jamuna R, Kandavalli SR, Balguri PK, Rao PK.	Waste and Biomass Valorization.	2025
52	Biosynthesize of ZnO nanoparticle from orange fruit peel biomass and its PVA-based composite packaging material: A greener material for suitable packaging.	Abhang LB, Subramanian T, Nagabhooshanam N, Sharma K, Rao PV, Devi KM, LakshmiLavanya A.	Biomass Conversion and Biorefinery	2025
53	Electromagnetic interference shielding and mechanical and hydrophobic properties of papaya peel biocarbon and banana fiber–reinforced epoxy composite: synthesize and characterization.	Mohanasundaram S, Kumar GC, Nagabhooshanam N, Sharma K, Rao PK, Pravallika VS, Shankar MS.	Biomass Conversion and Biorefinery.	2025
54	A characterization study on toughening vinyl ester composites using annealed biosilica from fox tail millet husk and nettle fiber.	Jamuna R, Kandavalli SR, Arthis P, Rao PK.	Biomass Conversion and Biorefinery.	2025
55	Thermo-chemical synthesis of microcrystalline cellulose from fibrous root of cassava tuber and reinforcement effect on banana-polyester composite.	Ramachandiran V, Raja VL, Rajakumar IP, Rao PK.	Biomass Conversion and Biorefinery.	2025
56	Mechanical, wear and thermal behaviour of rice husk microfibre and ZrO2 bioceramic from Phyllanthus niruri extracts reinforced vinyl ester composites.	Anandavel B, Pushparaj JP, Prabhu B, Rao PK.	Biomass Conversion and Biorefinery.	2025
57	Enhancing mechanical and thermal properties of epoxy-based polymer matrix composites through hybrid reinforcement with carbon, glass and steel.	Surendernath P, Rao PK, Satish Kumar MV.	Journal of the Mechanical Behavior of Materials.	2025
58	Influence of gas nitriding on the surface layer of M50 NiL steel for aerospace-bearing applications.	Anil Kumar Reddy C, Rao PK, Venkatesh B, Nageswara Rao B.	Journal of the Mechanical Behavior of Materials.	2025
59	Influence of liquid nitriding on the surface layer of M50 NiL steel for bearing applications.	Anil Kumar Reddy C, Rao PK, Venkatesh B, Rao BN.	Journal of the Mechanical Behavior of Materials.	2025
60	A characterization study on toughening natural fibre composites using functionalized barely husk biosilica	Krishnamoorthy N, Nagabhooshanam N, Rao PK, Verma R, Kumar DS, Sankar GA, Kumar BK, Mohanavel V.	. Biomass Conversion and Biorefinery.	2025
61	Enrichment and Characteristics of Studies of ZK60 Magnesium Alloy Composites Embedded with Boron Carbide/Carbon Fibre Through Ultrasonic-Aided Stir Cast Route.	Singh LB, Chaturvedi R, Shankhyan A, Rao PK, Rajesh KV, Nagarajan N, Sambaru KB, Maranan R, Murali M, Sathiyamurthy S.	International Journal of Metalcasting.	2025
62	Utilization of Coconut Shell Pyro Oil Blended with the Optimum Amount of Turpentine for Better Performance in Diesel Engine	Harish Venkatesan, Venkatesan Kuppusamy, B. Kiran Kumar	International Journal of Vehicle Structures and Systems	2025
63	Advancing Wire Electrical Discharge Machining of AISI P20+Ni Steel using Hybrid Deep Belief Neural Network - Search and Rescue Optimization Algorithm	"B. Kirankumara, K. Siva Satya Mohan, K. Venkatesan, Sudhansu Ranjan Das and Priyaranjan Sharma"	"Internat ional Journal of Vehicle Structures & Systems"	2025
64	Effect of Plasma treated-Aluminum Coating on Plain Woven Fabrics Biodegradable Composites.	Nagamadhu M, Gunge A, Kivade SB, Patil S, Raj A N, Kiran Kumar B, Singh T, Sharma P, Anne G.	Journal of Natural Fibers.	2025
65	An Experimental Investigation on Indirect Solar Dryer for Drying Sliced Onions using Phase Change Materials (PCM).	Aqil LA, Athul bhattad,	J. Environ. Nanotechnol.	2025
66	Numerical investigations of superconducting material cooling using buoyancy-driven heat transport in cryogenic nanofluids.	Nayak S, Bhattad A, Patel KS.	Heat Transfer Engineering	2025
67	ADVANCED DVR CONTROL WITH IOT FOR VOLTAGE SAG COMPENSATION IN WIND-CONNECTED POWER GRIDS.	Ilambirai RC, Kanthimathi T, Thimmarayan R, Sagar BS.	INTERNATIONAL JOURNAL OF ADVANCES IN SIGNAL AND IMAGE SCIENCES.	2025
68	Experimental Analysis of Palmyra Biodiesel Performance in a Diesel Engine with Varied Injection Timing	Sai Sarath, P. Mastan vali, M. Rajesh	"Internat ional Journal of Vehicle Structures & Systems"	2025
69	Experimental Investigation to Mitigate Environmental Pollutants by using Emulsified Biodiesel	G.R. Sanjay Krishna, Lokesh Kalapala, T. Nagadurga, T. Srinivasa Rao, Lachigalla Pavan Kumar, Jammu Mukesh, Mupparaju Siva Ramakrishna, Kondamudi Praveen, Kondaraju Nagasiddarth	International Journal of Vehicle Structures and Systems	2025
70	Investigation of Diesel Engine Performance, Emissions and Combustion Characteristics Utilizing Emulsified Biodiesel at Varied CRs	Karimulla Syed, M. Venkatesalu, Lakshmi Mansa Birada, Gentapogu Sharon, Shaik Abdul Samad, Veeranki Sundhar Kumar, V.S.V.S. Ram Reddy, S. Ganesh Venkatakrishna	International Journal of Vehicle Structures and Systems	2025
71	Experimental and machine learning-based optimization of dual-fuel engine performance using biodiesel and hydrogen-producer gas mixtures.	Sanjeevannavar MB, Banapurmath NR, Kumar VD, Halewadimath SS, Sajjan AM, Badruddin IA, Atgur V, Soudagar ME, Kamangar S.	International Journal of Hydrogen Energy	2025
72	CFD simulations and experiments of fins to enhance heat transfer in air-cooled motorcycle engines	Atgur V, Rao BN, Manavendra G, Banapurmath NR, Badruddin IA, Sajjan AM, Kamangar S, Hussien M.	Journal of Thermal Analysis and Calorimetry	2025
73	Optimizing Performance and Emissions: Injection Pressure Variations in a Four-Stroke CI Engine using Algae Biodiesel.	Kirankumar B, Omprakash B, Venkatesan K, Ganapathi R, Shareef SK, Pittala RK.	International Journal of Vehicle Structures & Systems (IJVSS)	2025
74	Fabrication and physicochemical properties of nickel oxide (NiO) thin films.	Mulla MG, Pittala RK.	Ceramics International	2025
75	Correction to: NiO nanosheet-assembled chemiresistive sensor for NO2 detection.	Ambi RR, Mali RA, Pawar AB, Mulla MM, Pittala RK.	Applied Physics A	2025
76	NiO nanosheet-assembled chemiresistive sensor for NO2 detection.	Ambi RR, Mali RA, Pawar AB, Mulla MM, Pittala RK.	Applied Physics A.	2025
77	Synthesis and characterization of open cell Ni-Cr foam developed using Pulse electro deposition technique for filtration applications.	Pittala RK, Sharma P, Anne G, Arab J, Unune DR, Kumar CS, Fernandes F.	Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.	2025
78	Amine functionalized maleimide grafted MWCNT–CFRP hybrid composites interfacial/matrix healing and mechanical performance through thermally reversible cycloaddition	Dhanaraju G, Pittala RK, Ben BS, Ben BA, Atgur V, Banapurmath NR, Badruddin IA, Kamangar S.	Polymer Composites.	2025
79	Optimized spray pyrolytic fabrication of engineered hexagonal ZnO nanorods: structural, optical, and electrical properties.	Mulla MG, Pittala RK.	Journal of the Australian Ceramic Society.	2025
80	A comparative study of microstructure development, corrosion resistance and mechanical properties of dissimilar AA5083–AA6082 weldments produced by CMT, FSW and TIG welding processes.	Nidumolu EP, Pittala RK, Yelamasetti B.	Welding International	2025
81	Mechanical and corrosion analyses of dissimilar weldments of AA6082 and AA5083 using CMT welding: a probability-based multi-objective optimization approach.	Nidumolu EP, Pittala RK, Yelamasetti B.	International Journal on Interactive Design and Manufacturing (IJIDeM)	2025
82	Emerging Roles of Ionic Liquids in Biodiesel: A Review on Catalysis, Process Design, and Recyclability	Ramajayam JG, Samal P, Lakshmipathy MV, Perumal T, Govindarajan M, Baidya T, Yadav KK, Bhutto JK, Alreshidi MA, Hakami H.	. Energy & Fuels	2025
83	A State-of-the-Art review on Micro-Machining of nitinol shape memory alloys and optimization of process variables considering the future trends of research.	Dutta S, Sarma DK, Vora J, Chaudhari R, Bhowmik A, Samal P, Khanna S.	Journal of Manufacturing and Materials Processing.	2025
84	Investigation and characterization of novel aluminium matrix composites enhanced by recycled borosilicate glass	Dey D, Kumar R, Beemkumar N, Kulshreshta A, Kumar M, Bhowmik A, Samal P, Sarma AD.	Journal of Inorganic and Organometallic Polymers and Materials	2025
85	Predictive modeling of the mechanical behavior of 3D-printed polylactic acid/wood composite: Comparison of GEP and ANN methods	Priyaranjan Samal	AIP Advances	2025
86	A comprehensive review on the viability of minimum quantity lubrication technology for machining difficult-to-cut alloys.	Bhowmik A, Kumar R, Thulasiram R, Thatoi DN, Bisht YS, Samal P, Kotteda TK, Tejani GG, Santhosh AJ.	AIP Advances	2025
87	Study on Machining Capabilities of Mg/Zn and Mg/Al Functionally Graded Materials Fabricated Using Liquid Processing Route.	Surekha B, Ranjan R, Ghadai SK, Mohapatra SK, Ravi Teja T, Samal P.	Journal of Inorganic and Organometallic Polymers and Materials.	2025
88	Assessing Additive Manufacturing Techniques for Polymer and Metal Matrix Composites in Aerospace Applications.	Kuttan AA, Khansole AB, Harsha A, Prabhakaran R, Kumar KS, Hussain BI.	Transactions of the Indian Institute of Metals	2025
89	IoT Integration With CMPA‐PINN for Islanding Detection Through Microgrid Hierarchical Control.	Komala CR, Jeyakumar S, Deepika G, Swaroopa K, Rangaree P, Arif M, Saikia B, BalaSubramanyam PN.	International Journal of Communication Systems	2025
90	A study on different methods to change the Rayleigh number in the analysis of heat transfer	Vikrant Chandrakar, A. Bhattad, P. Samal, JR Senapati & AK Kashyap	Scientific Reports	2025
91	Parametric Optimization of Aluminum Alloy 6061 Using Wire-EDM for Automotive Applications: A Taguchi-Based Approach	Manojkuamr S. Kate, Priyaranjan Samal	Journal of Polymer and Composites	2025
92	"Sizing charts and generalized correlation for predicting mass flow rate of low-GWP eco-friendly refrigerants in adiabatic capillary tube"	Sai Sarath	Science and Technology for the Built Environment	2025
93	Evaluation of Impact Strength and Hardness for Polymer Matrix Composites with Steel, Carbon and Glass Reinforcements for Automotive Applications	Purna Surendernath, Pothamsetty Kasi V Rao, M. V. Satish Kumar	Journal of Polymer & Composites	2025
94	Corrosion Study on AZ80/91 Mg-Alloys Processed at Different Temperatures during the ECAE Process	G.M. Naik, S. Ramesh, G. Shreyas, Priyaranjan Samal, D. Likhith Raj, Gajanan Anne, P. Sharma	International Journal of Vehicle Structures and Systems	2025
95	Effect of Hybridization on Tensile and Flexural Strengths of Carbon, Glass and Steel Fiber Composites: A Comparative Study	Surendernath, P Rao, Pothamsetty Kasi V., MVS Kumar, M. V. Satish	Journal of Polymer & Composites	2025
96	An Innovative Approach to Find the Optimum Lubricant for Diverse Applications Based on Scikit-Learn Library Using Python	Sastry, DVAR, Kutubuddin, SA	Journal of Polymer & Composites	2025
97	Optimizing Vehicle Structures Using Functionally Graded Materials of Aluminum and Carbon Fiber Reinforced Polymer Composites	Praneetha, AS, SN Padhi	Journal of Polymer & Composites	2025
98	Hydrodynamic Studies of Pressurized Fluidized Bed Gasifier of Conical Distributors	S. Sarveswara Reddy, M. Yashwanth Kumar, Dr. K.V. Durga Rajesh	AIP Conference Proceedings	2025
99	Research on Optimization of Electric Pneumatic Combined Braking Control for Urban Rail Transit Trains	Karimulla Syed, S. Joshua Kumaresan, P. Muthu Krishnammal A. Kaleel Rahuman Balaji V, Beenarani Bb	IEEE Conference	2025
100	Synthesis and characterization of thermally remendable epoxy polymer composite through diels-alder bonding	G Dhanaraju, RK Pittala, BS Ben, BA Ben	AIP Conference Proceedings	2025
101	Performance analysis of open belt drives with various materials: A comprehensive study on torque, power loss and stress of belts using mathworks	T Buddi, RK Pittala, KVD Rajesh, ST Ahmed, V John, J Singh	AIP Conference Proceedings	2025
102	Artificial Intelligence Algorithms for Robotic Harvesting of Agricultural Produce.	Kolhalkar NR, Pandit AA, Kedar SA, Yedukondalu G.	International Conference on AIML-Applications for Engineering & Technology (ICAET)	2025
103	Collision-Aware Autonomous Vehicle Motion Planning using Spiking Convolutional Neural Networks and Parrot Optimization Algorithm.	Poosapadi D, Harsha AS, Battula SK, Choudri V, TA A, Priya SG.	International Conference on Intelligent Computing and Control Systems (ICICCS).	2025

S.No	Title of the Paper	Name of the authors	Title of the journal	Year
1	"COMPARATIVE PERFORMANCE ASSESSMENT OF NANO-COMPOSITE, CATHODE OF LMSO-BSCMF FOR LOW TEMPERATURE SOLID OXIDE, FUEL CELL APPLICATIONS"	P.V.C.K. Subhashini,, K.V.D. Rajesh"	Composites Theory and Practice	2024
2	Advancements in Vehicle Technology by Development of Metal Matrix AZ91E Composites for Automotive Applications with Different Aspect Ratios using Upset Forging and Analysis on Evolution of Microstructure	Surya Chandra Swamy Gari,, K. V. Durga Rajesh"	International Journal of Vehicle Structures and Systems	2024
3	"Microstructure and mechanical properties of double side friction, stir welded AA 7075 aluminum alloy"	"Kiran Kumar Vernapu, Venkata Durga Rajesh Kanchu, Rama Koteswara Rao Sajja,, Ramakrishna Thadivaka, and Srinivasa Rao Tadivaka"	Metallurgical Research & Technology	2024
4	"Cryogenic Treatment of Chromium–Molybdenum–Vanadium, Steels: Unveiling Microstructural Features and Improved, Mechanical Properties"	S. S. Reddy, K. V. D. Rajesh, M. F. L. King	Journal of The Institution of Engineers (India): Series D	2024
5	"Ni-Fe bimetallic catalysts with high dispersion supported by SBA-15 evaluated for the selective oxidation of benzyl alcohol to benzaldehyde, "	Mangesh V.L., Govindarajan, Murali, Raju Chekuri, Rama Bhadri, Perumal, Tamizhdurai, Perumal T.;, Rajendran, Kumaran, c;, Chandrasekaran, Kavitha, c;, Siva Kumar, Nadavala, d, Send mail to Siva Kumar N.;, Basivi, Praveen Kumar, e;, Alreshaidan, Salwa B., f;, Al-Fatesh, Ahmed S., d	RSC Advances	2024
6	Selective oxidation of veratryl alcohol to veratraldehyde using more active catalyst in a continuous reactor	V LMangesh	Journal of Saudi Chemical Society	2024
7	Forecasting Remaining Usable Life of Vehicle Bearings for Enhanced Production and Reduced Maintenance Costs	Raj Kumar Pittalaa, G. Diwakar, V.L.N. Harshavardhan, T.	Internat iournal Journal of Vehicle Structures & Systems	2024
8	Advancements in textile dye removal: a critical review of layered double hydroxides and clay minerals as efficient adsorbents	Giphin George, Anu Mary Ealias, Manickam Puratchiveeran Saravanakumar	Environmental Science and Pollution Research	2024
9	Performance and Emission Analysis of Jute Biodiesel Blends with CeO2 Nanoparticles in a Diesel Engine	Sai Sarath Kruthiventi Rao G.N.; Gopidesi R.K.	Internat iournal Journal of Vehicle Structures & Systems	2024
10	Influence of Wire Fin on the Performance of Heat Exchanger used in the Joule Thomson Refrigerator	Sai Sarath Kruthiventi.; Nandhanagopal G.R.; Rao Y.V.H.; Kumar P.K.	Internat iournal Journal of Vehicle Structures & Systems	2024
11	Effects of Compression Ratio on a Diesel Engine Powered by Tamarind Seed Biodiesel Blend	Sai Sarath Kruthiventi Rambabu R.; Sridevi G.; Borigorla V.; Kalyanamanohar V.	Internat iournal Journal of Vehicle Structures & Systems	2024
12	Exploring the Potential of Emulsified Biodiesel Derived from Juliflora for Sustainable Transportation	Sai Sarath KruthiventiChunchu B.R.K.; Sushma S.P.; Gopidesi R.K.; Khan P.M.	Internat iournal Journal of Vehicle Structures & Systems	2024
13	Analyzing the Influence of Tool Profile on Friction Stir Process with Taguchi Optimization and Tungsten Nano Powder	Syed, Karimulla Ali, Md. Abid Reddy, Kurre Prasanth Kumar, Boggarapu Nageswara Rao	International Journal of Vehicle Structures and Systems	2024
14	A Brief Overview of Sustainable Food Drying Technologies	Laeeq Ahmed Khan Aqil, Atul Bhattad and Srinivasa Rao Pittam	NanoWorld Journal	2024
15	Investigations on paraffin wax/CQD composite phase change material - Improved latent heat and thermal stability	J. Emeema, G. Murali, B. Venkateswara Reddi , V.L. Mangesh	Journal of Energy Storage	2024
16	Predict the characteristics of diesel engine using glycine max oil biofuel	Boorneni Suresh, Kundan Meshram, Abhishek Dasore, Upendra Rajak , Prem Kumar Chaurasiya, Tikendra Nath Verma	Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering,	2024
17	Maritime Decarbonization: Alternate Marine Fuel From Hydroprocessing of Waste Plastics	V L Mangesh	FUEL	2024
18	A state-of-the-art review of multilayer packaging recycling: Challenges, alternatives, and outlook	V L Mangesh	Journal of Cleaner Production	2024
19	Thermo-chemical synthesis of microcrystalline cellulose from fibrous root of cassava tuber and reinforcement effect on banana-polyester composite	Dr. P. Kasi Visweswara Rao	Biomass Conversion and Biorefinery	2024
20	Characterization of Lignocellulosic Roselle Fibre Epoxy Composites for Lightweight Structures	Kazi, A.M., Ramasastry, D.V.A., Waddar, S., Mane, S.G.	Transactions of the Indian Institute of Metals	2024
21	Spring Back Investigations in Aluminium and Stainless-Steel Sheets	Sudhy S Panicker, K Jithesh, PV Sivaprasad, Priyaranjan Sharma, Vinay Varghese	International Journal of Vehicle Structures & Systems (IJVSS)	2024
22	Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on the performance and sustainability assessment	Soumikh Roy, Anshuman Das, Ramanuj Kumar, Sudhansu Ranjan Das, Mohammad Rafighi, Priyaranjan Sharma	Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture	2024
23	Performance and Emission Characteristics of Mahua Biodiesel Blends with Di-Ethyl Ether as Diesel Fuel Replacement	T. Vijayakumar, kawade Mahesh M, salman, Sandeep Kumar Turaka, Mani Kanta Sanaka, Akram Ansari Shaik	International Journal of Vehicle Structures & Systems (IJVSS)	2024
24	Impact of Juliflora Biodiesel on Diesel Engine Performance, Emissions and Combustion Characteristics	T. Vijayakumar, Kunchala Nandavisai Reddy, Kattepogu Raghuveer, Pagolu Karthik,, Kuchipudi Sukumar	International Journal of Vehicle Structures & Systems (IJVSS)	2024
25	Comparative Analysis of Tamarind Seed Biodiesel Blends in a Diesel Engine: Performance and Emissions Characteristics	T. Vijayakumar, Jaswanth Palakaluri, Mahammad Khan Pathan, Sriram Nelluri, Pradeep Janga	International Journal of Vehicle Structures & Systems (IJVSS)	2024
26	Exploring thermal dynamics of polyaniline-modified paraffin wax phase change material with varied PANI loadings (1–4% wt.)	Janumala, Emeema, Govindarajan, Murali, Reddi, Bommareddi Venkateswara, Manickam, Murugan, Venkatesan, Elumalai Perumal, Saleel, C. Ahamed, Alwetaishi, Mamdooh, Shaik, Saboor, Nur-E-Alam, Mohammad, Soudagar, Manzoore Elahi M.	Heat and Mass transfer	2024
27	Experimental studies on solar reusable can air heating system integrated with latent heat storage	G. Murali, P. S. N. Masthan Vali, J. Jaya, A. K. Bewoor, Ravinder Kumar	Journal of thermal analysis and calorimtery	2024
28	Multi-Response Optimization of Turning Parameters with Vikor-Entropy Method on Machining of AA6061-TiB2 In-Situ Composites	Chandrasekhar, S, Sastry, KSBSVS, Murali, G, Karuturi, L]	Journal of polymer and composites	2024
29	Comprehensive Review on Brake Friction Materials	Kumar, DN, Vijayakumar, T, Murali, G	Journal of polymer and composites	2024
30	Optimization of Process Parameters for Cu90Ni10 Alloy Processed by Wire Arc Additive Manufacturing (WAAM) Using an L9 Orthogonal Array	Jyothi Padmaja k, T. Vijaya Kumar, Kedar Mallik Mantrala, G. Murali	Journal of polymer and composites	2024
31	Optimum Machining Parameters for Al 7075 Hybrid Metal Matrix Composites Using Multi-objective Optimization Technique and the Modified Taguchi Approach	Mugutkar, H, Kumar, TV, Murali, G , Boggarapu, NR	Journal of polymer and composites	2024
32	Performance and Emission Analysis of Lemongrass Biodiesel in Diesel Engines at Varied Compression Ratios: A Novel Exploration	Rao, Gangolu Nageswara, Syed, Karimulla, Sai, T. Maruthi Manikanta ,Kawade, Mahesh M., Dhoria, Sneha H. Kalyanamanohar,	International Journal of Vehicle Structures and Systems	2024
33	Sustainable biofuel synthesis from non-edible oils: a mesoporous ZSM-5/Ni/Pt catalyst approach	V L Mangesh	RSC Advances	2024
34	Biomaterials and its Role in Dentistry–A Review	Vadiraj.B, Pothamsetty Kasi V Rao, K.Kiran Kumar	Journal of polymer and composites	2024
35	Mechanical, wear and thermal behaviour of rice husk microfibre and ZrO2 bioceramic from Phyllanthus niruri extracts reinforced vinyl ester composites	Anandavel B, Pushparaj, J. Paulmar, Prabhu B, Pothamsetty Kasi V Rao	Biomass Conversion and Biorefinery	2024
36	A characterization study on toughening vinyl ester composites using annealed biosilica from fox tail millet husk and nettle fiber	Jamuna R, Kandavalli, Sumanth Ratna, Arthis P, Pothamsetty Kasi V Rao	Biomass Conversion and Biorefinery	2024
37	Optimal constrained groove pressing process parameters applying modified Taguchi technique and multi-objective optimization	Muni Tanuja Anantha, Sireesha Koneru, Saritha Pyatla, Parameshwaran Pillai Thiruvambalam Pillai, Tanya Buddi and Nageswara Rao Boggarapu	PERTANIKA JOURNAL OF SCIENCE & TECHNOLOGY	2024
38	Thermally efficient gas turbine with pressure drop-based automated filter cleaning and optimized fuel control system	Surase, Ravindra S, Rama Krishna K., Chopade, Ramchandra P.	Applied thermal engineering	2024
39	Multi-objective optimization to specify optimal selective laser melting process parameters for SS316 L powder	Prasanth Kumar, Reddy , Boggarapu N.R., Narayana Murty, S.V.S.	Multidiscipline Modeling in Materials and Structures	2024
40	Expeditious Identification of IGBT Switch Fault in Bidirectional Microgrid Inverter Linked to Distributed Energy Resources	Ghosh S.S, Chattopadhyay S., Arigela S.H., Kamesh V.V	Journal of Nano- and Electronic Physics	2024
41	Analysis of SS308l Wire Arc Additive Manufactured Specimen Reinforced with Al2O3	Bhadrakali, A.S., Sastry, D.V.A.R., Ramprabhu, T.	International Journal of Vehicle Structures and Systems	2024
42	Comparative Analysis of Thermal Conductivity of the Hybrid Nanoparticles Based Sunflower and Jatropha Vegetable Oil	Asalekar, AJ; Sastry, DVAR	JOURNAL OF POLYMER & COMPOSITES	2024
43	Artificial intelligence based-prediction of energy efficiency and tailpipe emissions of soybean methyl ester fuelled CI engine under variable compression ratios	Rajak, Upendra; Ağbulut, Ümit; Dasore, Abhishek; Verma, Tikendra Nath	Energy	2024
44	Comparative Numerical Analysis of Heat and Mass Transfer Characteristics in Sisko Al2 O3-Eg and TiO2-Eg Fluids on a Stretched Surface	Jyothi K., Dasore, Abhishek; Ganapati R.; Shareef, Sk. Mohammad; Chamkha, Ali J.; Prasad, V. Raghavendra;	Frontiers in Heat and Mass Transfer	2024
45	Synthesis and characterization of open cell Ni-Cr foam developed using Pulse electro deposition technique for filtration applications	Raj Kumar Pittala, Priyaranjan Sharma , Gajanan Anne, Julfekar Arab, Deepak Rajendra Unune , Ch Sateesh Kumar and Filipe Fernandes	Journal of Engineering Manufacture	2024
46	Experimentation with different alumina hybrid (50:50) suspensions as coolant on plate heat exchanger performance	Atul Bhattad	Journal of Thermal Analysis and Calorimetry	2024
47	Optimal Constrained Groove Pressing Process Parameters Applying Modified Taguchi Technique and Multi-Objective Optimization	Muni Tanuja Anantha, Sireesha Koneru, Saritha Pyatla, Parameshwaran Pillai Thiruvambalam Pillai, Tanya Buddi and Nageswara Rao Boggarapu	Pertanika Journal of Science and Technology	2024
48	Surface quality improvement of AZ31 Mg alloy by a combination of modified Taguchi method and simple multi objective optimization procedure	"Anantha, Muni Tanuja, Koneru, Sireesha, Thiruvambalam Pillai, Parameshwaran Pillai, Boggarapu Nageswara Rao, Buddi, Tanya, Usanova, Kseniia Iurevna,Deorari, Rajesh."	Cogent Engineering	2024
49	Enhanced mechanical performance and damping behavior of CFRP composites through exfoliated MWCNT functionalization	Dhanaraju, G., Pittala, R. K., Ben, B. S., Atgur, V., Banapurmath, N. R., Umarfarooq, M. A., Singh, B	Nanocomposites	2024
50	Investigating Temperature Effects on Thermal Analysis of Composite Heat Pipes with Diverse Geometrical Configurations	Gadipelly Bhaskar, K. V. Narasimha Rao and M. Udaya Kumar	Journal of Polymer & Composites	2024
51	Experimentation with different alumina hybrid (50:50) suspensions as coolant on plate heat exchanger performance	Atul Bhattad	Journal of Thermal Analysis and Calorimetry	2024
52	Optimal Constrained Groove Pressing Process Parameters Applying Modified Taguchi Technique and Multi-Objective Optimization	Muni Tanuja Anantha, Sireesha Koneru, Saritha Pyatla, Parameshwaran Pillai Thiruvambalam Pillai, Tanya Buddi and Nageswara Rao Boggarapu	Pertanika Journal of Science and Technology	2024
53	Surface quality improvement of AZ31 Mg alloy by a combination of modified Taguchi method and simple multi objective optimization procedure	Anantha, Muni Tanuja,, Koneru, Sireesha,, Thiruvambalam Pillai, Parameshwaran Pillai,, Boggarapu Nageswara Rao,, Buddi, Tanya,, Usanova, Kseniia Iurevna,, Deorari, Rajesh.	Cogent Engineering	2024
54	Enhanced mechanical performance and damping behavior of CFRP composites through exfoliated MWCNT functionalization	Dhanaraju, G., Pittala, R. K., Ben, B. S., Atgur, V., Banapurmath, N. R., Umarfarooq, M. A., Singh, B	Nanocomposites	2024
55	Comprehensive Review on Brake Friction Materials	Devan Naveen ; Vijayakumar ; Murali	Journal of polymer & composites	2024
56	Optimization of Process Parameters for Cu90Ni10 Alloy Processed by Wire Arc Additive Manufacturing (WAAM) Using an L9 Orthogonal Array		Journal of polymer & composites	2024
57	Optimum Machining Parameters for Al 7075 Hybrid Metal Matrix Composites Using Multi-objective Optimization Technique and the Modified Taguchi Approach	Mugutkar ; VijayaKumar; Murali	Journal of polymer & composites	2024
58	Investigating Temperature Effects on Thermal Analysis of Composite Heat Pipes with Diverse Geometrical Configurations	Gadipelly Bhaskar, K. V. Narasimha Rao and M. Udaya Kumar	Journal of Polymer & Composites	2024
59	Improved solar still productivity using PCM and nano‑ PCM composites integerated energy storage	G. Murali, P. Ramani, M Murugan, P.V. Elumalai, Nayani Uday RanjanGoud S. Prabhakar	Scientic report	2024
60	Predictive Placement of IC Chips using ANN-GA Approach for Efficient Thermal Cooling	Anant Sidhappa Kurhade, Ramdas Biradar, Rahul Shivaji Yadav, Prashant Patil, Nitin Babanrao, Kardekar, Shital Yashwant Waware, Kashinath Haribhau Munde, Ajitkumar Gulab Nimbalkar,, Govindarajan Murali	Journal of Advanced Research in Fluid Mechanics and Thermal Sciences	2024
61	Effect of diffusion of elements on microstructural, mechanical, and machining characteristics of Al7075/ZnAl4 functionally graded material with and without Ag and Pb interface	Dr. Priyaranjan Samal	Journal of Alloys and Metallurgical Systems	2024
62	Synergistic Effect of B4C and Multi-Walled CNT on Enhancing the Tribological Performance of Aluminum A383 Hybrid Composites	Dr. Priyaranjan Samal	Lubricants	2024
63	Numerical analysis of alpha-beta brass by constitutive model for, prediction of hot flow stress	Bandhavi Challaa , A. Anitha Lakshmi, G. Revathi, A. V. S. Ram Prasad, S. Shilpa,, Evgeny Vladimirovich Kotov, and Nitin Duklan	Cogent Engineering	2024
64	A Comprehensive Evaluation of Recent Studies Investigating Nanofluids Utilization in Heat Exchangers	G.Murali	Journal of Advanced Research in Fluid Mechanics and Thermal Sciences	2024
65	Characterization of polyester composite developed using silane-treated rubber seed cellulose toughened acrylonitrile butadiene styrene honey comb core and sunn hemp fiber	Pothamsetty Kasi V Rao	Polymer Bulletin	2024
66	Electromagnetic interference shielding and mechanical and hydrophobic properties of papaya peel biocarbon and banana fber–reinforced epoxy composite: synthesize and characterization	Pothamsetty Kasi V Rao	Biomass Conversion and Biorefinery	2024
67	Parametric modeling of resin-bonded sand mold systems using machine learning-based approaches	Priyaranjan Samal	Engineering Research Express	2024
68	Biosynthesize of ZnO nanoparticle from orange fruit peel biomass and its PVA-based composite packaging material: a greener material for suitable packaging	Pothamsetty Kasi V Rao	Biomass Conversion and Biorefinery	2024
69	Comparative Analysis of Shot‑Peened CrMoV Steels: Microstructural, Residual Stress, Surface Roughness, and Hardness Investigations	K. V. Durga Rajesh	Journal of The Institution of Engineers (India): Series D	2024
70	DoS attack detection and hill climbing based optimal forwarder selection	Palamalai Radhakrishnan, Senthil Kumar Seeni, Dhamotharan Rukmani Devi, Tumuluri Kanthimathi, Devadhas David Neels Ponkumar, Vikram Nattamai Sankaran, Subbiah Murugan	Indonesian Journal of Electrical Engineering and Computer Science,	2024
71	Thermal Analysis of Sea Water Hybrid Solar Desalination System - An Experimental Approach	Kedar, Shridhar Bewoor Anand, Murali, Govindarajan, More, Ganesh Vijay, Roy, Anindit	International Journal of Heat and Technology	2024
72	Friction stir welding of aluminum AA6061 & AA8011 using optimization approach based on both Taguchi and grey relational analysis	A. Anitha Lakshmia, Bandhavi Challaa , N. Sateesha , K. V. Durga Rajesh , G. Revathi,, Khristina Maksudovna Vafaeva, and Ankita Josh	Cogent Engineering	2024
73	Shot peening effects on Cr-Mo-V steel: a comprehensive study of microstructure, surface roughness, residual stress, and mechanical behavior	Sarveswara Reddy S.,, Durga Rajesh K., V,, Maiti A.K. ,, Janaki, Durga Venkatesh	Engineering Research Express	2024
74	Amine functionalized maleimide grafted MWCNT–CFRP hybrid composites interfacial/matrix healing and mechanical performance through thermally reversible cycloaddition	Goteti Dhanaraju, Raj Kumar Pittala, B Satish Ben, B Avinash Ben, Vinay Atgur, NR Banapurmath, Irfan Anjum Badruddin, Sarfaraz Kamangar	Polymer composites	2024
75	Performance Analysis of Corrugated Twisted Tape Inserts for Heat Transfer Augmentation	Anant Sidhappa Kurhade, Govindarajan Murali, Pallavi Abhinandan Jadhav, Parimal Sharad Bhambare, Shital Yashwant Waware, Tushar Gadekar, Rahul Shivaji Yadav, Ramdas Biradar, Prashant Patil	Journal of Advanced Research in Fluid Mechanics and Thermal Sciences	2024
76	Investigating the Effect of Heat Transfer Influenced by the Application of Wavy Corrugated Twisted Tape Inserts in Double Pipe Heat Exchangers	"Anant Sidhappa Kurhade, Parimal Sharad Bhambare, Vijay Pandurang Desai, Govindarajan Murali, Rahul Shivaji Yadav, Prashant Patil, Tushar Gadekar, Ramdas Biradar, Swanand Kirpekar, Girish Anant Charwad, Shital Yashwant Waware"	Journal of Advanced Research in Fluid Mechanics and Thermal Sciences	2024
77	"Enhancing Upper Limb Rehabilitation: Workspace, Singularity and Structural Analysis of an Adaptive Two Link Planar Manipulator"	"Karimulla Syed, G. Yedukondalu*, N.V.N.G Joga Rao, Nandhivargam Rachan , Kodali Ajay, Abdul Malik"	"Journal of Polymer & Composites"	2024
78	Microstructural Analysis, Tribological, and Corrosion Behavior of Nix-Tiy Alloys Deposited Using µ-Plasma Additive Manufacturing Process	"Bankar, Priyanka S, Rao, Pothamsetty Kasi V. ; Sawant, Mayur S; Kumar, Pankaj; Arya, Pradyumn Kumar; Jain, Neelesh Kumar"	Journal of Materials Engineering and Performance	2024
79	Biochar as an eco-friendly adsorbent for ibuprofen removal via adsorption: A review	"Harez Rashid Ahmed , Kawan F. Kayani , Anu Mary Ealias, Giphin George"	Inorganic Chemistry Communications	2024
80	A Review on Mechanical and Wear Characteristics of Magnesium Metal Matrix Composites	Dhanunjay Kumar Ammisetti,K Sai Sarath,S. S. Harish Kruthiventi	Journal of Tribology	2024
81	Investigation of thermal properties of SiO2 and TiO2 composite nanofluids synthesized using sol–gel method for solar thermal applications	Vasanthakumar R, Navaneethakrishnan P, Murali G, Vali P.S.N. Masthan	Journal of Thermal analysis and calorimetry	2024
82	"A Characterization Study on Toughening Vinyl Ester Composites Using Annealed Vinyl Silane Functionalized Biosilica from Foxtail Millet Husk and Nettle Fibre"	R. Jamuna, Sumanth Ratna Kandavalli, Praveen Kumar Balguri, Pothamsetty Kasi V Rao	Waste and Biomass Valorization	2024
83	Investigation and Characterization of Novel Aluminium Matrix Composites Enhanced by Recycled Borosilicate Glass	Priyaranjan Samal	Journal of Inorganic and Organometallic Polymers and Materials	2024
84	Eco-friendly biocatalysis: Innovative approaches for the sustainable removal of diverse dyes from aqueous solutions	Harez Rashid Ahmed, Kawan F. Kayani, Anu Mary Ealias, Giphin George	Inorganic Chemistry Communications	2024
85	Microplastics: A hidden carrier of per- and polyfluoroalkyl substances and their effect on soil properties	Kashif Tanzil, Anu Mary Ealias, Giphin George, Sagarika Panigrahi	Journal of Environmental Chemical Engineering	2024
86	Effect of Electrode Material Variations on Wear Characteristics of Stir Cast A356/Red Mud/TiC Hybrid Metal Matrix Composite During Electrical Discharge Machining	Priyaranjan Samal	Tribology in Industry	2024
87	Influence of plasma nitriding on surface layer of M50NiL steel for bearing applications	C. Anil Kumar Reddy, Pothamsetty Kasi V Rao, B.Venkatesh, B.Nageswara Rao	JOURNAL OF THE MECHANICAL BEHAVIOR OF MATERIALS	2024

S.No	Title of the Paper	Name of the authors	Title of the journal	Year
1	Investigation on surface integrity in hard turning of AISI 4140 steel using recently developed SPPP-AlTiSiN coated carbide insert under nanofluid-minimum quantity lubrication, Lubricants	Priyaranjan Sharma	MDPI AG	2023
2	Characterization of natural fiber extracted from Bauhinia vahlii bast subjected to different surface treatments: A potential reinforcement in polymer composite	Priyaranjan Samal	Taylor & Francis	2023
3	Enhancement of Mechanical, Thermal and Morphological Properties of Eleusine Indica Grass Fiber Reinforced Epoxy Composites	Priyaranjan Samal	Taylor & Francis	2023
4	Hot Deformation Behavior and Strain Rate Sensitivity of α+β Brass Sheet by Uniaxial Material Constitutive Equations	Seeram, Srinivasa Rao	Indian Journal of Engineering & Materials Sciences	2023
5	Comparative analysis of new meta-heuristic-variants for privacy preservation in wireless mobile adhoc networks for IoT applications	G.DIWAKAR	Computer Communications	2023
6	Inverse Jacobian Programming Approach to Robotic Path Planning of Various Path Profiles	G.Yedukondalu	International Journal on Interactive Design and Manufacturing	2023
7	Nanocomposite of intrinsically conductive polymers used as the active component in acetone solvent sensors	Priyaranjan Samal	Nanotechnology for Environmental Engineering	2023
8	Effect of SiC and WC Reinforcements on Microstructural and Mechanical Characteristics of Copper Alloy-Based Metal Matrix Composites Using Stir Casting Route	Priyaranjan Samal	Applied Sciences (MDPI)	2023
9	Study of Ce-doping effects on optical, morphological, magnetic, structural, and antibacterial properties of NiCr2O4 ceramics	V L Mangesh	Materials Science and Engineering B-Advanced Functional Solid-State Materials (Elsevier)	2023
10	DNA binding, cleavage, catalytic, magnetic active; 2,2–bipyridyl based d-f hetero binuclear Gd(III), Cu(II) complexes and their Electrochemical, fluorescence studies	V L Mangesh	Arabian journal Of Chemistry (Elsevier)	2023
11	"Exergy and performance analysis of low GWP and Non-flammable HFO based refrigerant mixtures as alternatives to R134a "	Sai Sarath	Thermal Science and Engineering Progress ( Elsevier)	2023
12	Ionic liquid supported on mesoporous Pd/SBA-15 during the manufacture of 1,3-butadiene using ethanol at lower temperature reaction	V L Mangesh	Fuel	2023
13	Cytotoxic, Antidiabetic, and Antioxidant Study of Biogenically Improvised Elsholtzia blanda and Chitosan-Assisted Zinc Oxide Nanoparticles	V L Mangesh	ACS Omega	2023
14	Performance analysis of diesel engine using madhuca longifolia blended biodiesel with nano-additive for variable parameters	Atul Bhattad	International Journal of Ambient Energy	2023
15	, Review on Mono and Hybrid Nanofluids: Preparation, Properties, Investigation, and Applications in IC Engines and Heat Transfer	Atul Bhattad	Energies	2023
16	Thermal Performance Evaluation of Plate-Type Heat Exchanger with Alumina–Titania Hybrid Suspensions	Atul Bhattad	Fluids	2023
17	Effect of Infill Patterns with Machine Learning Techniques on the Tensile Properties of Polylactic Acid-Based Ceramic Materials with Fused Filament Fabrication	Ranganath Lolla, Adusumilli Srinath, Murali Govindarajan,* Manickam Murugan,, Elumalai Perumal Venkatesan,* and Nasim Hasan*"	ACS Omega	2023
18	CFD Approach for Thermal Management to Enhance the Reliability of IC Chips	G. Murali , S.Anant kurade	International Journal of Engineering Trends and Technology	2023
19	Influence of AWJM parameters on surface quality of BSHC.	Murali G, Arunkumar K, Kanagaraj R,	MATERIALS AND MANUFACTURING PROCESSES.(T&F)	2023
20	Simplified optimal design of NU202 cylindrical roller bearing and validation through GA	Sireesha Koneru, A.Srinath, Boggarapu Nageswara Rao, Tanya Buddi	International Journal on interactive design and manufacturing(IJIDeM)	2023
21	Dry Sliding Wear Performances of AA5052 Hybrid Composite Brake Disc Materials Reinforced With In Situ Synthesized TiC and Multi-Walled Carbon Nanotube	Priyaranjan Samal	ASME Journal of Tribology	2023
22	Mechanical and thermal properties of Careya arborea bast fiber–reinforced chitosan composites for packaging industries	Priyaranjan Samal	Biomass Conversion and Biorefinery	2023
23	TiO2/SO4/Ni@SBA-15 catalysts for the selective oxidation of veratryl alcohol to veratraldehyde in a continuous reactor	V L Mangesh	Molecular Catalysis (Elsevier)	2023
24	Synthesis of ceria nanoparticles for the catalytic activity of cyclohexene epoxidation and selective detection of nitrite	V L Mangesh	Journal of Saudi Chemical Society (Elsevier)	2023
25	ZrO2/SO4/Cu nanoparticles supported on reduced graphene oxide for selective oxidation of propylene glycol in continuous reactor	V L Mangesh	International Journal of Hydrogen Energy (Elsevier)	2023
26	Long-term impacts of climate change on coastal and transitional eco-systems in India: an overview of its current status, future projections, solutions, and policies	V L Mangesh	RSC Advances (RSC)	2023
27	Removal of Toluidine blue in water using green synthesized nanomaterials	V L Mangesh	South African Journal of Chemical Engineering (Elsevier)	2023
28	A hybrid approach consisting of multi-objective and multivariate analyses for WAAM specimens	Rama sastry	Engineering Research Express	2023
29	Experimental investigation and process parameter optimization in cold metal transfer welding for SS304L using response surface method	Rama sastry	Engineering Research Express	2023
30	Mechanical and Fracture Characterization of Epoxy/PLA/Graphene/SiO2 Composites	A. Srinath	Frattura ed Integrita Strutturale	2023
31	Numerical analysis of a scroll expander driven by various refrigerants for ORC applications	K. Rama krishna	International Journal on Interactive Design and Manufacturing	2023
32	Evaluation of Mechanical Properties for Epoxy Resin in Nano Composite Diffusion	S.S.Rao	Advances in Materials Science and Engineering	2023
33	Prediction of Remaining useful life of Rolling Bearing using Hybrid DCNN-BiGRU Model	G. Diwakar	Journal of Vibration Engineering and Technologie	2023
34	Effectiveness in Online Professional Education: Influences of Technology, Lms, Personal Factors and Teaching Aids	K. V. Narasimha Rao	Journal of Engineering Education Transformations	2023
35	PERFORMANCE ANALYSIS OF PLASTIC INJECTION MOLDING USING PARTICLE SWARM BASED MODIFIED SEQUENTIAL QUADRATIC PROGRAMMING ALGORITHM MULTI OBJECTIVE OPTIMIZATION MODEL	S.N. Padhi	Journal of Theoretical and Applied Information Technology	2023
36	Quality and Defect Prediction in Plastic Injection Molding using Machine Learning Algorithms based Gating Systems and Its Mathematical Models	S.N. Padhi	International Journal on Recent and Innovation Trends in Computing and Communication	2023
37	Comparison of carbon fiber and glass fiber partial foot orthosis by Experimental and computational method	S.N. Padhi	Materials Today: Proceeding	2023
38	Tribological Behavior on Stir-Casted Metal Matrix Composites of Al8011 and Nano Boron Carbide Particles	S.N. Padhi	Journal of Nanomaterials	2023
39	Evaluation of ankle foot orthosis using experimental and computational methods (AFO)	S.N. Padhi	Materials Today: Proceeding	2023
40	Experimental and computational evaluation of partial foot orthosis foot plate manufactured using glass fiber	S.N. Padhi	Materials Today: Proceedings	2023
41	Investigation of the cutting-edge radius size effect on dynamic forces in micro end milling of brass260	G. Yedukondalu	Materials Today: Proceedings	2023
42	Experimental chatter process stability using end milling process on Al6061 alloy with multiple bearing span conditions	G. Yedukondalu	Materials Today: Proceedings	2023
43	Revamp the tool life of high speed steel tool by cryogenic heat therapy	K. V. Durga Rajesh	Materials Today: Proceedings	2023
44	Doped BSCF cathode materials for low-temperature solid oxide fuel cell applications-A short review	K. V. Durga Rajesh	Materials Today: Proceedings	2023
45	Development and Characterization of Ba0.5Sr0.5(Co1−xMg x)0.2Fe0.8O3 Cathode Materials System for Low-Temperature Solid Oxide Fuel Cell (LT-SOFC) Applications	K. V. Durga Rajesh	Transactions of the Indian Institute of Metals	2023
46	Influence of Metallic Particles on Properties of Aluminium Composites through Taguchi Technique	P. Kasi Visweswara Rao	Advances in Materials Science and Engineering	2023
47	Application of biomaterials and finite element analysis in dentistry – A review	P. Kasi Visweswara Rao	Materials Today: Proceedings	2023
48	Surface characterization of SAE 304 after WED cutting: an experimental investigation and optimization	Priya Ranjan Sharma	Journal of Materials Research and Technology	2023
49	The high-efficiency supercapacitor electrodes influencing laser-induced nanomaterials with co-doped Nitrogen and Phosphorous	Karimula Syed	Materials Today: Proceedings	2023
50	Experimental investigation and multi-objective optimization of eco-friendly near-dry electrical discharge machining of shape memory alloy using Cu/SiC/Gr composite electrode	M. Nageswara Rao	Environmental Science and Pollution Research	2023
51	Studies of Performance of Cs2TiI6−XBrX (Where x = 0 to 6)-Based Mixed Halide Perovskite Solar Cell with CdS Electron Transport Layer	M. Nageswara Rao	Micromachines	2023
52	Development and Mechanical Characterization of Ni-Cr Alloy Foam Using Ultrasonic-Assisted Electroplating Coating Technique	Raj Kumar Pittala	Coatings	2023
53	Utilization of additives in biodiesel blends for improving the diesel engine performance and minimizing emissions through a modified Taguchi approach	B. Nageswar Rao, N.R. Banapurmath, Vinay Atgur, Mallesh . Sanjeevannavar, A.M. Sajjan, Chandramouli Vadlamudi, Sanjay Krishnappa, T.M. Yunus Khan, N.H. Ayachit	Heliyon	2023
54	Ionic liquid supported on mesoporous Pd/SBA-15 during the manufacture of 1,3-butadiene using ethanol at lower temperature reaction	P. Tamizhdurai, V.L. Mangesh, Aboud Ahmed Awadh Bahajjaj, Umamaheswari Rajai d, Mani Govindasamy, R. Vasanthi, R. Kumaran, T. Augustine	FUEL	2023
55	Numerical and empirical simulation of fluid flow in a spiral plate heat exchanger with Nusselt number correlation development	Abhishek Dasore, Ramakrishna Konijeti, B. Om Prakash & Balram Yelamasetti	International Journal on Interactive Design and Manufacturing	2023
56	Investigation of Vibration Characteristics of Stir Cast Aluminum Reinforced SiC Composite Beam	"Sidda Reddy Bathini , Ramanjaneya Reddy Alavala, Omprakash B, Abhishek Dasore* ,, Manoj Panchal , Mohammad Shareef Shaik"	Revue des Composites et des Materiaux Avances	2023
57	The catalytic activity of copper/nickel supported on mesoporous aluminum catalyst towards cyclohexene epoxidation in continuous reactor	V L Mangesh	Journal of Saudi Chemical Society (Elsevier)	2023
58	Synthesis of CeO2/SO4/Ni nanoparticle with a greener perspective for the selective oxidation of propylene glycol in continuous reactor	V L Mangesh	Molecular Catalysis (Elsevier)	2023
59	Enhancement of corrosion resistance of CrMoV low alloy steels using cryogenic treatment	S Sarveswara Reddy, K V Durga Rajesh, M Francis Luther King	Engineering Research Express	2023
60	Effect of cobalt and magnesium doping on the performance of Ba0.5Sr0.5Fe0.8O3 cathode for solid oxide fuel cell applications	P V C K Subhashini, K V D Rajesh	Engineering Research Express	2023
61	CFD analysis of heat transfer by free convection over a vertical cylinder with circular fins of triangular cross-section	Ramakrishna Konijeti, Abhishek Dasore, Upendra Rajak, Rajan Kumar, Abhishek Sharma & Anil Singh Yadav	Multiscale and Multidisciplinary Modeling, Experiments and Design	2023
62	Battery Thermal Management System on Trapezoidal Battery Pack With Liquid Cooling System Utilizing Phase Change Materia	P.S.N. Masthan Vali, G.Murali	ASME (Journal of Heat and Mass transfer)	2023
63	COMPARISON STUDY ON COOLING MANAGEMENT OF COMPOSITE PHASE CHANGE MATERIAL BATTERY PACK: TWO DIFFERENT CASES	P.S.N. Masthan Vali, G.Murali, sivakandan chinnaswamy	Thermal science	2023
64	INVESTIGATIONS ON A NOVEL COMPOSITE PHASE CHANGE MATERIAL COMPRISING PARAFFIN WAX AND CQDS FOR THERMAL CONDUCTIVITY ENHANCEMENT	Janumula Emeema, G.Murali, sivakandan chinnaswamy	Thermal science	2023
65	Shear strength, wear, thermal conductivity, and hydrophobicity behavior of fox millet husk biosilica and Amaranthus dubius stem fiber–reinforced epoxy composite: a concept of biomass conversion	L.A.Raman, Nagabooshanam, Satish, Pothamsetty Kasi V Rao	Biomass Conversion and Biorefinery	2023
66	Development and characterization of red matta rice husk derived Si2N2O bioceramic-epoxy nanocomposite coating for damage and barrier protection of building materials	Dhengare S.W., Sharun V., Mariappan M., Pothamsetty Kasi V Rao	Biomass Conversion and Biorefinery	2023
67	A characterization study on toughening natural fibre composites using functionalized barely husk biosilica	N. Krishnamoorthy, Nagabhooshanam, Pothamsetty Kasi V Rao, Rajesh Verma	Biomass Conversion and Biorefinery	2023
68	Utilization of the modified Taguchi approach to seek optimal design parameters for improving the heat transfer coefficient of a wire mesh fin heat sink	K. V. Durga Rajesh,, B. Nageswara Rao, R. Sriram Swaroop, V. Surya Kiran,, Tanya B and Swadesh Kumar Singh	International Journal on Interactive Design and Manufacturing	2023
69	Soft Computing Based Parametric Optimization of Cutting Rate, Surface Roughness, and Kerf Width in Wire Electric Discharge Machining of High Strength Ti-3Al-2.5 V	Anshuman Kumar,, C Upadhyay, Naveen Kumar, A.V.S Ram Prasad, D. S. Nagaraju	Experimental Techniques	2023
70	Extraction and Characterization of Natural CASCABELA Thevetia Bast Fibers: A Potential Candidate as Reinforcement in Epoxy Composites	S.B. Sahu, S. Nayak, J. Mohapatra, S.K. Khunita, P. Samal, S. Swain	Journal of Natural Fibers	2023
71	Optimal lapping and polishing process parameters for finer surface finishing of GCr15 steel cylindrical roller bearings	Koneru, S., Srinath, A., Rao, B.N., Buddi, T.	International Journal on Interactive Design and Manufacturing	2023
72	Experimental investigation of tensile specimens of CGP processed AZ31 Mg alloy for different temperatures and strain rates	Muni Tanuja, Tanya B, B N Rao	International Journal on Interactive Design and Manufacturing	2023
73	Numerical Analysis and Comparison of Various Cross Sections of Heat Pipes in Heat Exchanger	Gadipelly Bhaskar, K.V. Narasimha Rao , M. Udaya Kumar	Journal of Polymer & Composites	2023
74	Numerical Simulation of Transient Free Convection in a Rectangular Cavity Filled with Porous Material Using Finite Element Formulations	D Jyosthna, Lokesh Kalapala	Journal of Polymer & Composites	2023
75	Numerical Analysis of Battery Thermal Management Using Phase Change Material Concerning Melting Fraction and Temperature	P. Sai Kiran, T. Kanthimathi, Murali G, P.S.N. Masthan Vali	Journal of Polymer & Composites	2023
76	Liquid-Cooled Battery Thermal Management System: A Numerical Investigation of Effect of Coolant Path and Flow Rate Optimization	Daniel Samuel Parmar, Giphin George, Priyaranjan Sharma	Journal of Polymer & Composites	2023
77	Corrosion Characterisation of Low Alloy CrMoV Steel Before and After Cryogenic Heat Therapy	S. Sarveswara Reddy, K.V. Durga Rajesh, Francis Luther King	Journal of Polymer & Composites	2023
78	Taguchi Design for Optimization of Reinforcement at Toe area of Carbon Fiber Foot Plate	Chandrika Wagle , S.N. Padhi	Journal of Polymer & Composites	2023
79	An Evaluation of Versatile CNC Machines for Tabletop Applications	Ashwini Kumar Baluguri1,* , Srinivasa Rao Seeram	Journal of Polymer & Composites	2023
80	A Critical Review on Semi-solid and Solid Lubricants for Industrial Applications	Shaikh Azharuddin Kutubuddin , D.V. A. Rama Sastry, K. Venkata Ramana	Journal of Polymer & Composites	2023
81	Review of Post-consumer Plastics and Pyrolysis Technology	A Bhargav , Karimulla Syed, V L Mangesh, Murali G	Journal of Polymer & Composites	2023
82	Prediction and Comparative Analysis of Thermal Conductivity of Jatropha Oil-based Hybrid Nanofluid by Multivariable Regression and ANN	Amol J. Asalekar1,2*, D.V. A. Rama Sastry1	Journal of Polymer & Composites	2023
83	Characterization and Fabrication of Hybrid Matrix Composites of AZ91E Metal With Distinct Reinforcements of Fly Ash And ZrO2	Surya Chandra Swamy Gari1*, K. V. Durga Rajesh2, Murali G3	Journal of Polymer & Composites	2023
84	Design and Development of Ankle Foot Orthosis for Foot Amputated Person by Using Carbon Fibre	Chaitanya Girish Burande, S.N. Padh	Journal of Polymer & Composites	2023
85	Design and analysis of engine mount bracket to enhance the crash performance of the engine mounting system	K. V. P. T. Jagannadha Rao1*, Dr. G. Diwakar2	Journal of Polymer & Composites	2023
86	Experimental Study on Thermal Management of Nano-Enhanced Phase Change Material Integrated Battery Pack	P.S.N.Masthan Vali,Murali G	ASME(Journal of heat and mass transfer)	2023
87	Thermophysical properties and heat transfer in mono and hybrid nanofluids with different base fluids: an overview	T. Kanthimathi1 · P. Bhramara2 · Vinay Atgur1 · B. Nageswara Rao1 · Nagaraj R. Banapurmath3 · Ashok M. Sajjan3 ·Irfan Anjum Badruddin4 · Sarfaraz Kamangar4 · T. M. Y. Khan4 · Rahmath Ulla Baig5 · Chandramouli Vadlamudi6 · Sanjay Krishnappa6	Journal of Thermal Analysis and Calorimetry	2023
88	Sustainable synthesis: High-efficiency ZrO2/KIT-6 catalyst to hydroprocess waste plastics into fuels	V.L.Mangesh	Process Safety and Environmental Protection	2023
89	An Intelligent System for Early Detection of Pests using Image Processing Technique to protect Crop Health and Yield	S. Ramesh Kumar, Srikanth Vemuru, Srinath.A	Journal of Harbin Engineering University (JHEU)	2023
90	Development of BSCMF system of cathode materials and fabrication of symmetrical cell (BSCMF/GDC/BSCMF) for low temperature solid oxide fuel cell applications	P. V.C. K. Subhashini & K. V. Durga Rajesh	Advances in Materials and Processing Technologies	2023

S.no	Title of the Paper	Name of the authors	Title of the journal	Year
1	WEAR INFLUENCE ON PERFORMANCE OF CONICAL HYDRODYNAMIC JOURNAL BEARING	KAMBLE D.H., PHALLE V.M., MANTHA S.S.	TRIBOLOGY IN INDUSTRY	2022
2	INVESTIGATIONS ON PHASE CHANGE MATERIALS FOR ENHANCEMENT OF THERMAL CONDUCTIVITY	JANUMALA E., GOVINDARAJAN M., REDDI V.R.B., CHINNASAMY S.	THERMAL SCIENCE	2022
3	MATHEMATICAL MODELING FOR OUTPUT YIELD OBTAINED BY SINGLE SLOPE SOLAR STILL INTEGRATED WITH SAND TROUGH	VELLANKI N., GOVINDARAJAN M., GANNA N., CHINNASAMY S.	THERMAL SCIENCE	2022
4	ESSENCE OF THERMAL ANALYSIS TO ASSESS BIODIESEL COMBUSTION PERFORMANCE	ATGUR V., MANAVENDRA G., BANAPURMATH N.R., RAO B.N., RAJHI A.A., KHAN T.M.Y., VADLAMUDI C., KRISHNAPPA S., SAJJAN A.M., VENKATESH R.	ENERGIES	2022
5	A REVIEW ON RECENT DEVELOPMENTS OF SOLAR STILLS TO ENHANCE PRODUCTIVITY USING NANOPARTICLES AND NANO-PCM	V N., MURALI G., SANKEERTHANA M., MURUGAN M.	INTERNATIONAL JOURNAL OF GREEN ENERGY	2022
6	THERMOGRAVIMETRIC STUDY AND COMBUSTION CHARACTERISTICS OF BIODIESEL BLENDS PRODUCED FROM REPURPOSE USED COOKING OIL	MORE G.V., RAO Y.V.H.	INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY	2022
7	HOT DEFORMATION BEHAVIOR AND STRAIN RATE SENSITIVITY OF Α+Β BRASS SHEET BY UNIAXIAL MATERIAL CONSTITUTIVE EQUATIONS	CHALLA B., SEERAM S.R.	INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES	2022
8	PERFORMANCE AND EMISSION CHARACTERISTICS ASSESSMENT OF COMPRESSION IGNITION ENGINE FUELLED WITH THE BLENDS OF NOVEL ANTIOXIDANT CATECHOL-DAOK BIODIESEL	KARISHMA S.M., RAJAK U., NAIK B.K., DASORE A., KONIJETI R.	ENERGY	2022
9	THERMAL CONTROL OF IC CHIPS USING PHASE CHANGE MATERIAL: A CFD INVESTIGATION	KURHADE A.S., MURALI G.	INTERNATIONAL JOURNAL OF MODERN PHYSICS C	2022
10	VISCOSITY AND THERMAL CONDUCTIVITY OF COBALT AND SILICA NANOFLUID IN AN OPTIMUM MIXTURE OF GLYCEROL AND WATER	PRASAD T.R., KRISHNA K.R., SHARMA K.V., MANTRAVADI N.	COLLOID JOURNAL	2022
11	BIODIESEL PRODUCTION FROM DK OILS USING TAGUCHI L9 TECHNIQUES: CHARACTERIZATION AND THERMOGRAVIMETRIC STUDY OF COMBUSTION CHARACTERISTICS	MORE G.V., HANUMANTHA RAO Y.V., KEDAR S.A., GAWANDE S.H.	JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY	2022
12	EFFECT OF THERMAL AGEING TEMPERATURE AND TIME ON THE MECHANICAL PROPERTIES OF CNT/GFRP COMPOSITES	SRAVANTHI K., RAO B.N., MAHESH V.	AIP CONFERENCE PROCEEDINGS	2022
13	THE STUDY OF HEAT TRANSFER ENHANCEMENT DUE TO VARIOUS NANOFLUIDS BETWEEN ROTATING STRETCHABLE DISKS	MALLIKARJUNA B., HARI PRASAD P., SARAVANAKUMAR G.	INTERNATIONAL JOURNAL OF AMBIENT ENERGY	2022
14	ASSESSMENT OF DIETHYL ETHER AS A FUEL ADDITIVE ON THE DIVERSE CHARACTERISTICS OF DIESEL ENGINE POWERED WITH WASTE MANGO SEED BIODIESEL BLEND	RAMI REDDY S., MURALI G., DHANA RAJU V.	INTERNATIONAL JOURNAL OF AMBIENT ENERGY	2022
15	EFFECT OF TURBULENCE AND MULTIPLE INJECTION STRATEGIES ON HOMOGENEOUS CHARGE COMPRESSION IGNITION (HCCI) DIESEL ENGINES–A REVIEW	VENKATESWARLU K., RAMAKRISHNA K.	INTERNATIONAL JOURNAL OF AMBIENT ENERGY	2022
16	EXPERIMENTAL INVESTIGATION OF ALGAE BIOFUEL–DIESEL BLENDS ON PERFORMANCE OF A CRDI DIESEL ENGINE	INDRAREDDY N., VENKATESWARLU K., KONIJETI R.	INTERNATIONAL JOURNAL OF AMBIENT ENERGY	2022
17	FUEL INJECTION TIMING IMPACT ON DIESEL ENGINE PERFORMANCE, COMBUSTION AND EMISSION CHARACTERISTICS OF NANO ADDITIVE BIODIESEL BLENDS	JAMUNA RANI G., RAO Y.V.H., BALAKRISHNA B.	INTERNATIONAL JOURNAL OF AMBIENT ENERGY	2022
18	INFLUENCE OF DECANOL AS FUEL ADDITIVE ON THE DIVERSE CHARACTERISTICS OF THE DIESEL ENGINE POWERED WITH MANGO SEED BIODIESEL BLEND	RAMI REDDY S., MURALI G., DHANA RAJU V.	INTERNATIONAL JOURNAL OF AMBIENT ENERGY	2022
19	MODELLING AND PARAMETRIC ANALYSIS OF CONVENTIONAL SOLAR STILL USING PASSIVE CONTROL TECHNIQUES	SAI SARATH K., MUNIRAJAN S., VELLANKI N., KUSHNOORE S., DIWAKAR G.	INTERNATIONAL JOURNAL OF AMBIENT ENERGY	2022
20	THERMAL CHARACTERISATION OF DAIRY WASHED SCUM METHYL ESTER AND ITS B-20 BLEND FOR COMBUSTION APPLICATIONS	ATGUR V., MANAVENDRA G., DESAI G.P., NAGESWARA RAO B.	INTERNATIONAL JOURNAL OF AMBIENT ENERGY	2022
21	SPECOM 2022 PREFACE	MAHADEVA PRASANNA S.R., KARPOV A., SAMUDRAVIJAYA K., AGRAWAL S.S.	LECTURE NOTES IN COMPUTER SCIENCE (INCLUDING SUBSERIES LECTURE NOTES IN ARTIFICIAL INTELLIGENCE AND LECTURE NOTES IN BIOINFORMATICS)	2022
22	RECENT ADVANCES IN PHASE CHANGE MATERIALS FOR THERMAL ENERGY STORAGE-A REVIEW	VENKATESWARLU K., RAMAKRISHNA K.	JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING	2022
23	FAULTY GEAR DIAGNOSIS USING WEIGHTED PCA WITH SWISH ACTIVATED BLSTM CLASSIFIER	GHULANAVAR R., JAGADEESH A., DAMA K.K.	MULTIMEDIA TOOLS AND APPLICATIONS	2022
24	GRAPHITIC CARBON NITRIDE INCORPORATED EUROPIUM MOLYBDATE COMPOSITE AS AN ENHANCED SENSING PLATFORM FOR ELECTROCHEMICAL DETECTION OF CARBENDAZIM IN AGRICULTURAL PRODUCTS	SAKTHINATHAN S., KEYAN A.K., VASU D., VINOTHINI S., NAGARAJ K., MANGESH V.L., CHIU T.-W.	JOURNAL OF THE ELECTROCHEMICAL SOCIETY	2022
25	INVESTIGATION OF CRACK PROPERTIES USING ARTIFICIAL NEURAL NETWORK APPROACH	ABHIJEET H KEKAN., B RAGHU KUMAR	INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING	2022
26	A REVIEW ON DEVELOPMENT OF ASSISTIVE UPPER LIMBS FOR AMPUTATIONS AND HUMANOIDS	M SREEDHAR ., Y KALYANA CHAKRAVARTHY	INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING	2022
27	DEVELOPMENT OF PATIENT-SPECIFIC IMPLANT FOR MAXILLOFACIAL SURGERY THROUGH DIRECT METAL LASER SINTERING	RAKESH KOPPUNUR., KIRAN KUMAR DAMA., K S VEPA., SAGAR N V S S	INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING	2022
28	EXPERIMENTAL AND THEORETICAL INVESTIGATION OF STRESS CONCENTRATION EFFECT UNDER THERMAL AND DYNAMIC LOADS ON HIGH, INTERMEDIATE AND LOW PRESSURE TURBINE ROTORS	R NAGENDRA BABU., K V RAMANA., S KIRAN KUMAR., KALAPALA PRASAD	INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING	2022
29	PERFORMANCE AND EMISSION PARAMETER OF AGRICULTURE DIESEL ENGINE FUELED WITH BIODIESEL	SB LAHANE., P ISSAC PRASAD	INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING	2022
30	THE INFLUENCE OF COPPER AND ZINC ADDITIONS ON HARDNESS, ELASTIC MODULUS AND WEAR BEHAVIOR OF AL-B4C COMPOSITE	SHAIK ABDUL MUNAF., SRINIVASA REDDY VEMPATI., S MAGIBALAN., A KRISHNAKUMARI., M SARAVANAN., S SATISH KUMAR., B RAMESH	JOURNAL OF PHARMACEUTICAL NEGATIVE RESULTS	2022
31	INVESTIGATIONS INTO THE PRE-COOLING RATES OF APPLES IN CONTROLLED ATMOSPHERE STORAGE CHAMBERS	RAMESH BABU DAMARLA, KV NARASIMHA RAO	JOURNAL OF APPLIED HORTICULTURE	2022
32	PERFORMANCE INDICATORS FOR THE OPTIMAL BTE OF BIODIESELS WITH ADDITIVES THROUGH ENGINE TESTING BY THE TAGUCHI APPROACH	SANJEEVANNAVAR M.B., BANAPURMATH N.R., SOUDAGAR M.E.M., ATGUR V., HOSSAIN N., MUJTABA M.A., KHAN T.M.Y., RAO B.N., ISMAIL K.A., ELFASAKHANY A.	CHEMOSPHERE	2022
33	EXPERIMENTAL INVESTIGATION AND PARAMETER ANALYSIS OF SOLAR STILL WITH THE DIFFERENT WICK MATERIALS	ELANGOVAN R., SEERAM S.R., RADHA KRISHNAN B., VIJAYAN V.	IRANIAN JOURNAL OF CHEMISTRY AND CHEMICAL ENGINEERING	2022
34	THERMAL PERFORMANCE OF STABLE SIO2 NANOFLUIDS AND REGRESSION CORRELATIONS TO ESTIMATE THEIR THERMOPHYSICAL PROPERTIES	RAJENDRA PRASAD T., RAMA KRISHNA K., SHARMA K.V., NAGA BHASKAR C.	JOURNAL OF THE INDIAN CHEMICAL SOCIETY	2022
35	THERMALLY REMENDABLE BISMALEMIDE-MWCNT/DA-EPOXY NANOCOMPOSITE VIA DIELS-ALDER BONDING	DHANARAJU G., SATISH BEN B., PITTALA R.K.	POLYMER	2022
36	DAMPING BEHAVIOUR AND SELF-HEALING PERFORMANCE EVALUATION OF MICROCAPSULES REINFORCED EPOXY COMPOSITES BY IMPULSE EXCITATION TECHNIQUE	PITTALA R.K., DHANARAJU G., BEERA S.B., BEERA A.B.	JOURNAL OF REINFORCED PLASTICS AND COMPOSITES	2022
37	BIPOLAR FUZZY MAGNIFIED TRANSLATIONS IN GROUPS	KALYANI U.V., ESWARLAL T., NARASIMHA RAO K.V., IAMPAN A.	INTERNATIONAL JOURNAL OF ANALYSIS AND APPLICATIONS	2022
38	THERMAL ANALYSIS OF SHELL AND TUBE TYPE HEAT EXCHANGER USING HYBRID NANOFLUID	BHATTAD A., BABU S.S.	TRENDS IN SCIENCES	2022
39	THERMOGRAVITOMETRY AND CALORIMETRIC EVALUATION OF HONGE OIL METHYL ESTER AND ITS B-20 BLEND	ATGUR V., MANAVENDRA G., DESAI G.P., NAGESWARA RAO B.	CLEANER ENGINEERING AND TECHNOLOGY	2022
40	ARAMID FIBRE AS POTENTIAL REINFORCEMENT FOR POLYMER MATRIX COMPOSITES: A REVIEW	DHARMAVARAPU P., M.B.S S.R.	EMERGENT MATERIALS	2022
41	MULTIOBJECTIVE OPTIMIZATION FOR THE OPTIMAL HEAT PIPE WORKING PARAMETERS BASED ON TAGUCHI'S DESIGN OF EXPERIMENTS	KONERU S., SRINATH A., NAGESWARA RAO B.	HEAT TRANSFER	2022
42	MACHINABILITY STUDY OF ALUMINIUM 6082 REINFORCED WITH BORON CARBIDE AND TITANIUM BY STIR CASTING METHOD USING ABRASIVE WATER JET MACHINING PROCESS	UMANATH K., NITHYANANDHAN T., AJAYAN A., DEVIKA D., PRASATH M.G., KUMAR S.A., GANEESH R.	ENGINEERING RESEARCH EXPRESS	2022
43	FLOW SHOP SCHEDULING OF DRYING AND DISTRIBUTION UNIT OF AN AUTOMOBILE BRAKING SYSTEM	SHAIK A.M., DURGA RAJESH K.V., KESAVA RAO V.V.S., SRINIVASA RAO C.	INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING	2022
44	SUSTAINABLE CONCRETEGROUND GRANULATED BLAST-FURNACE SLAG BEAM: NUMERICAL INVESTIGATION USING HYBRID FRP AND GFRP TECHNIQUES	JOSE J.A., SHARMA R., SHARMA A.K., KARUNA M.S., RINAWA M.L., KUMAR M.N.V.R.L.	INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING	2022
45	EXPERIMENTAL INVESTIGATION AND OPTIMISATION OF Α–Β BRASS AT ELEVATED TEMPERATURES USING TAGUCHI APPROACH	CHALLA B., SRINIVASA RAO S., MANNE P., BUDDI T., SATYANARAYANA K.	ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES	2022
46	HIGH TEMPERATURES DEFORMATION AND FORMABILITY EVALUATION OF Α+Β BRASS SHEET BY EXPERIMENTAL AND THEORETICAL APPROACHES	CHALLA B., SRINIVASA RAO S.	ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES	2022
47	ANALYSIS ON BEHAVIOR OF TI-6AL-4V & TI-5553 BY PERFORMING TURNING OPERATION USING DEFORM-3D	BATHULA D.B., BUDDI T., SHAGWIRA H., MWEMA F.M., RAJESH K.V.D.	ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES	2022
48	FINITE ELEMENT ANALYSIS OF CHROMIUM AND MOLYBDENUM ALLOYED STEEL BILLETS FORGED ON MULTI STEP PROCESS USING SIMUFACT FORMING	RAJESH K.V.D., MISHRA H., BUDDI T.	ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES	2022
49	FINITE ELEMENT ANALYSIS OF CHROMIUM AND NICKEL ALLOYED STEEL BILLETS FORGED UNDER WARM FORMING PROCESS USING DEFORM-3D	RAJESH K.V.D., BUDDI T.	ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES	2022
50	FINITE ELEMENT SIMULATION OF TI-6AL-4V BILLET ON OPEN DIE FORGING PROCESS UNDER DIFFERENT TEMPERATURES USING DEFORM-3D	RAJESH K.V.D., BUDDI T., MISHRA H.	ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES	2022
51	WEAR AND CORROSION ANALYSIS ON MARAGING STEEL MS1 AND STAINLESS STEEL 316L DEVELOPED BY DIRECT METAL LASER SINTERING PROCESS	RAJESH K.V.D., SHAIK A.M., BUDDI T.	ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES	2022
52	THREE DIMENSIONAL PHOTOELASTIC INVESTIGATION FOR ANALYZING STRESS CONCENTRATION FACTOR IN ISOTROPIC SQUARE SIMPLY SUPPORTED PLATE WITH HOLE SUBJECTED TO TRANSVERSE LOADING	BANERJEE M., JAIN N.K., SANYAL S.	CURRENT APPLIED SCIENCE AND TECHNOLOGY	2022
53	THERMAL MANAGEMENT FOR GREEN VEHICLE BATTERIES UNDER NATURAL AND FORCED CONVECTION MODES	JAYABALAN J., GOVINDARAJAN M., MADHAV V.V., SABAREESAAN K.J.	CURRENT APPLIED SCIENCE AND TECHNOLOGY	2022
54	REAL TIME OPERATING SYSTEM IN FLEXIBLE MANUFACTURING ENVIRONMENT FOR TASK SCHEDULING	NAGESWARA RAO MEDIKONDU	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2022
55	IMPLEMENTATION OF ARTIFICIAL NEURAL NETWORK FOR TASK SCHEDULING PROBLEMS IN INDUSTRY 4.0	NAGESWARA RAO MEDIKONDU	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2022
56	EXPERIMENTAL INVESTIGATION ON SCHEDULING TASKS THROUGH GREEDY ALGORITHM	NAGESWARA RAO MEDIKONDU	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2022
57	TASK SCHEDULING IN GRID COMPUTING ENVIRONMENT WITH MEAN FLOWTIME CRITERION	NAGESWARA RAO MEDIKONDU	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2022
58	RESOURCE ALLOCATION AND TASK SCHEDULING IN CLOUD COMPUTING ENVIRONMENT THROUGH HEURISTIC ALGORITHM	NAGESWARA RAO MEDIKONDU	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2022
59	SMART MANUFACTURING SYSTEM TASK SCHEDULING THROUGH HADOOP SCHEDULER	NAGESWARA RAO MEDIKONDU	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2022
60	A NOVEL METHOD TO IMPROVE THE TOLERANCE OF POSITION IN PROFILES USING A TOOLING HOLE	B KIRAN KUMAR1*, K VENKATESAN2 , B SAIKRISHNA SRIKAR3	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2022
61	MICROPLASTIC SEGREGATION FROM SEWAGE WATER	B KIRAN KUMAR1 ,M SRIDEVI MADHUMITHA2 , S SAILAJA MADHU SRI3 , A JWALITHA4	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2022
62	DESIGN AND ANALYSIS OF SPUR GEAR IN STATIC AND DYNAMIC CONDITIONS	KARIMULLA SYED#1 , K. PRASANTH KUMAR REDDY#1	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2022
63	DESIGN AND ANALYSIS OF FOUR-WHEEL CHASSIS	KARIMULLA SYED1 , K. PRASANTH KUMAR REDDY1	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2022
64	CONTROLLING AND SIMULATION OF TILE CUTTINGMACHINE	KARIMULLA SYED#1 , K. PRASANTH KUMAR REDDY#1	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2022
65	DESIGN AND ANALYSIS OF E-VEHICLE FRAME	KARIMULLA SYED1 , K. PRASANTH KUMAR REDDY1	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2022
66	A REAL-CODED GENETIC ALGORITHM FOR IDENTIFICATION OF DEFECTS WITH ULTRASOUND TIME-OF-FLIGHT DATA	KODALI S.P., RAO B.N.	LECTURE NOTES IN NETWORKS AND SYSTEMS	2022
67	THE INFLUENCE OF BORON CARBIDE ON THE MECHANICAL PROPERTIES AND BONDING STRENGTH OF B4 C/NICKEL 63 COATINGS OF BRAKE DISC	RAMESH B., ELSHEIKH A.H., SATISHKUMAR S., SHAIK A.M., DJUANSJAH J., AHMADEIN M., MOUSTAFA E.B., ALSALEH N.A.	COATINGS	2022
68	EXPERIMENTAL EVALUATION OF ADDITIVELY DEPOSITED FUNCTIONALLY GRADED MATERIAL SAMPLES-MICROSCOPIC AND SPECTROSCOPIC ANALYSIS OF SS-316L/CO-CR-MO ALLOY	REDDY Y.P., NARAYANA K.L., MALLIK M.K., PAUL C.P., SINGH C.P.	AIMS MATERIALS SCIENCE	2022
69	EFFECT OF INFILL PATTERNS WITH MACHINE LEARNING TECHNIQUES ON THE TENSILE PROPERTIES OF POLYLACTIC ACID-BASED CERAMIC MATERIALS WITH FUSED FILAMENT FABRICATION	LOLLA R., SRINATH A., GOVINDARAJAN M., MURUGAN M., PERUMAL VENKATESAN E., HASAN N.	ACS OMEGA	2022
70	STUDIES ON EVALUATION OF THE THERMAL CONDUCTIVITY OF ALUMINA TITANIA HYBRID SUSPENSION NANOFLUIDS FOR ENHANCED HEAT TRANSFER APPLICATIONS	BHATTAD A., RAO B.N., ATGUR V., BANAPURMATH N.R., SAJJAN A.M., VADLAMUDI C., KRISHNAPPA S., YUNUS KHAN T.M., AYACHIT N.H.	ACS OMEGA	2022
71	ELIMINATION OF LEAD BY BIOSORPTION ON PARTHENIUM STEM POWDER USING BOX-BEHNKEN DESIGN	KAVITHA C., VIJAYASARATHI P., TAMIZHDURAI P., MYTHILY R., MANGESH V.L.	SOUTH AFRICAN JOURNAL OF CHEMICAL ENGINEERING	2022
72	AL-ZN-MN NANOCOMPOSITE SINTERING BY MECHANICAL ALLOYING AND CHARACTERIZATION WITH THE HELP OF SEM AND XRD	BANERJEE M., LAKSHMANA SWAMY B., BALA SUBRAMANYAM P.N.V., VERMA T.N.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
73	AGVS AND MACHINES SCHEDULING WITH CAMPBELL, DUDEK, SMITH ALGORITHM	NAGESWARA RAO M., PRAKASH BABU K., DAMA K.K., MALYALA S.K., RAJAK U.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
74	A MULTI-STAGE EVOLUTIONARY TOMOGRAPHIC RECONSTRUCTION ALGORITHM USING ULTRASOUND TIME-OF-FLIGHT PROJECTIONS	KODALI S.P., RAO B.N.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
75	AN EVOLUTIONARY TOMOGRAPHIC RECONSTRUCTION PROCEDURE FOR DEFECT IDENTIFICATION USING TIME-OF-FLIGHT OF ULTRASOUND	KODALI S.P., RAO B.N.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
76	DESIGN AND EVALUATION OF A MICROSENSOR FOR A BIONIC HAND WITH METAMATERIALS	SREEDHAR M., KALYANA CHAKRAVARTHY Y.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
77	DEVELOPMENT OF AN OPTIMAL PID CONTROLLER FOR THE 4-DOF MANIPULATOR USING GENETIC ALGORITHM	KODALI S.P., MANDAVA R.K., RAO B.N.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
78	EVOLUTION OF INDUSTRIAL ROBOTIC GRIPPERS—A REVIEW	ARULKIRUBAKARAN D., MALKIYA RASALIN PRINCE R., RAMESH R., RAJESH T.C.S.N., NEIL ANAND K., MATHEW S.M., BABY S.T., ANILA SHARON J., KISHORE K.C.S.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
79	EVOLUTION OF INDUSTRIAL ROBOTS DURING MID OF NINETEENTH CENTURY–BEGINNING OF TWENTIETH CENTURY—A REVIEW	ARULKIRUBAKARAN D., MALKIYA RASALIN PRINCE R., NAGARAJESH T.C.S., PALANISAMY D., ANAND K.N., SIDDHARTH S., NAGASURESH M., KISHORE K.C.S., ABHISHEK N.S.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
80	EXPERIMENTAL INVESTIGATION ON FMS ENVIRONMENT WITH OPERATIONAL COMPLETION TIME	DURGA PRASAD G., RAVI TEJA K.M.V., NAGESWARA RAO M., PHANINDRA KSHATRA D., RAKESH K.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
81	FLEXIBLE MANUFACTURING SYSTEM SCHEDULING THROUGH BRANCH AND BOUND ALGORITHM	NAGESWARA RAO M., GAYA PRASAD K., PRANEETH I., SAI PRUDHVI G., VINEETH E., RAJAK U.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
82	FLEXIBLE MANUFACTURING SYSTEM SCHEDULING WITH RELATIVE IMPORTANCE OF A WORK ITEM IN A WORKFLOW	MOHAN MANOJ V., SANDEEP K.S., DURGA PRASAD G., NAGESWARA RAO M., RAJAK U.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
83	FLEXIBLE MANUFACTURING SYSTEM SIMULTANEOUS SCHEDULING THROUGH PALMER HEURISTIC ALGORITHM	NAGESWARA RAO M., PRAKASH BABU K., DAMA K.K., MALYALA S.K., CHAURASIYA P.K.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
84	IMPLEMENTATION OF BRANCH AND BOUND ALGORITHM IN FMS WITH MEAN TARDINESS	NAGESWARA RAO M., DAMA K.K., VIJAYA KUMAR T., PRAKASH BABU K., RAJAK U.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
85	IMPLEMENTATION OF CAMPBELL, DUDEK, SMITH ALGORITHM IN FLEXIBLE MANUFACTURING SYSTEM WITH MEAN TARDINESS	NAGESWARA RAO M., PRAKASH BABU K., SANJAY KRISHNA G.R., VIJAYA KUMAR T., RAJAK U.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
86	IMPLEMENTATION OF JATINDER N. D. GUPTA ALGORITHM FOR FMS SCHEDULING PROBLEMS	NAGESWARA RAO M., PRAKASH BABU K., DAMA K.K., MALYALA S.K., RAJAK U.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
87	IMPLEMENTATION OF PRIORITY RULES IN FLEXIBLE MANUFACTURING SYSTEM SCHEDULING WITH MEAN TARDINESS	NAGESWARA RAO M., VIJAYA KUMAR T., PRAKASH BABU K., SANJAY KRISHNA G.R., SINGH S.K.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
88	MEAN TARDINESS WITH HEURISTIC IN INTELLIGENT MANUFACTURING SYSTEM	NAGESWARA RAO M., VIJAYA KUMAR T., PRAKASH BABU K., SANJAY KRISHNA G.R., CHAURASIYA P.K., RAJ A.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
89	MULTI-RESPONSE OPTIMIZATION OF MACHINING CHARACTERISTICS USING MQL THROUGH GRA AND TOPSIS APPROACH	VENKATA VISHNU A., BABU S.S., KUMAR P.J.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
90	OPERATIONAL CONTROL DECISIONS THROUGH RANDOM RULE IN FLEXIBLE MANUFACTURING SYSTEM	SAI SANDEEP K., NAGESWARA RAO M., RAKESH K., PHANINDRA KSHATRA D., RAVI TEJA K.M.V.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
91	REVIEW ON THE APPLICATION OF CGP TO IMPROVE AZ31 MG ALLOY PROPERTIES	MUNI TANUJA A., KUMAR A., NAGESWARA RAO B.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
92	ROBOTIC UTILIZATION IN FARMING FIELD—A REVIEW	ARULKIRUBAKARAN D., MALKIYA RASALIN PRINCE R., NEIL ANAND K., MANIKANDAN N., JENNY MANASWITHA D., LAVANYA A., SURESH M.N., KISHORE K.C.S., CHAUHAN B., VISHAL S.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
93	SIMULTANEOUS SCHEDULING WITH J N D GUPTA HEURISTIC ALGORITHM WITH MEAN TARDINESS	NAGESWARA RAO M., PRAKASH BABU K., VIJAYA KUMAR T., KUMAR MALYALA S., KUMAR SINGH S.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
94	THERMO-ECONOMIC OPTIMIZATION OF SPIRAL PLATE HX BY MEANS OF GRADIENT AND GRADIENT-FREE ALGORITHM	KRISHNA M.H., DASORE A., RAJAK U., KONIJETI R., VERMA T.N.	LECTURE NOTES IN MECHANICAL ENGINEERING	2022
95	THERMAL MANAGEMENT SYSTEM OF LITHIUM-ION BATTERY PACKS FOR ELECTRIC VEHICLES: AN INSIGHT BASED ON BIBLIOMETRIC STUDY	MURUGAN M., SARAVANAN A., ELUMALAI P.V., MURALI G., DHINESHBABU N.R., KUMAR P., AFZAL A.	JOURNAL OF ENERGY STORAGE	2022
96	TURBULENT MELTING CHARACTERISTICS OF HYBRID NANO-ENHANCED MOLTEN SALT PHASE CHANGE MATERIAL IN RECTANGULAR ENCLOSURE	HARISH R., NIMMAGADDA R., REDDY S.R.	JOURNAL OF ENERGY STORAGE	2022
97	DESIGN AND SIMULATION OF ROBOT HAND FOR WRITING AND CORRECTION ASSISTANT APPLICATIONS	SRI NAGA VENKAT P., SRINATH A., SANTOSH KUMAR G.N., VIJAY P., VENKATESH R.	INTERNATIONAL JOURNAL OF INTELLIGENT UNMANNED SYSTEMS	2022
98	A TRIAL RECREATION TO APPROVE FEM TO PREDICT TRANSVERSE YOUNG'S MODULUS OF FRO COMPOSITES	A. S. PRASAD	Madhya Bharti	2022
99	EXAMINATION OF TRAIN SUSPENSION FRAMEWORK UTILIZING MR DAMPERS	DVA RAMASATRY	Madhya Bharti	2022
100	EXPLORING THE NANOWORLD: AN EXPERIMENTAL STUDY ON THE SYNTHESIS AND OPTICAL PROPERTIES OF ZNO-CUO NANOPARTICLES	RATNA PRASAD PALADAGU	Asiatic Society of Mumbai	2022
101	CHALLENGES ENCOUNTERED IN THE MANUFACTURE AND MACHINING OF HYBRID ALUMINIUM METAL MATRIX COMPOSITES	KAMMULURI. BABURAJA	Asiatic Society of Mumbai	2022
102	ECO-FRIENDLY SYNTHESIS AND CHARACTERIZATION OF SILVER NANOPARTICLES FROM MANGIFERA INDICA LEAVES FOR DENTAL RESTORATION AND ENHANCED ANTIBACTERIAL APPLICATIONS	T. VIJAYA KUMAR	Asiatic Society of Mumbai	2022
103	EXPERIMENTAL STUDY ON SYNTHESIS AND OPTICAL PROPERTIES OF ZNO-CUO NANO PARTICLES	RATNA PRASAD PALADAGU	Asiatic Society of Mumbai	2022
104	A REVIEW ON HEAT TREATED BEARING STEELS FOR AEROSPACE APPLICATIONS	ANIL KUMAR REDDY C., NAGESWARA RAO B., SRINIVASAN T.	MATERIALS TODAY: PROCEEDINGS	2022
105	DESIGN OF DEHYDRATION EQUIPMENT FOR PADDY BASED ON ASSESSMENT FROM FARMERS	RAMESH BABU D., GOLI G., NARASIMHA RAO K.V., SAMBASIVA RAO N., SAI SUNAI A., ARAVIND B., RIYAZ M., PRAMOD M.	MATERIALS TODAY: PROCEEDINGS	2022
106	EFFECT OF FIBRE CONTENT ON PHYSICAL PROPERTIES OF SHORT ROSELLE FIBRE EPOXY COMPOSITES	KAZI A.M., RAMASASTRY D.V.A.	MATERIALS TODAY: PROCEEDINGS	2022
107	EFFECT OF PLASMA NITRIDING ON M50 NIL STEEL - A REVIEW	ANIL KUMAR REDDY C., SRINIVASAN T., VENKATESH B.	MATERIALS TODAY: PROCEEDINGS	2022
108	EPOXY REINFORCED WITH NANO TIO2 PARTICLES: AN EXPERIMENTAL INVESTIGATION OF MECHANICAL &AMP; TRIBOLOGICAL BEHAVIOR	BHARADWAJA K., SRINIVASA RAO S., BABURAO T.	MATERIALS TODAY: PROCEEDINGS	2022
109	EPOXY/SIO2 NANOCOMPOSITE MECHANICAL PROPERTIES AND TRIBOLOGICAL PERFORMANCE	BHARADWAJA K., RAO S.S., BABURAO T.	MATERIALS TODAY: PROCEEDINGS	2022
110	EXPERIMENTAL INVESTIGATION AND PARAMETRIC OPTIMIZATION DURING EDM OF TITANIUM GRADE 9 USING MOORA-FUZZY INTEGRATED MULTI-OBJECTIVE GENETIC ALGORITHM	KUMAR A., VIVEKANANDA K., RAM PRASAD A.V.S.	MATERIALS TODAY: PROCEEDINGS	2022
111	FORCED VIBRATION CHARACTERISTICS OF SANDWICH PANEL WITH GRPC FACES AND TITANIUM CORE UNDER THERMAL ENVIRONMENT	SIVAJIRAJA G., BHAGAT V., PADHI S.N., ARUNKUMAR M.P., DESSAI A.N., KIRAN KUMAR REDDY R.	MATERIALS TODAY: PROCEEDINGS	2022
112	FREE VIBRATION RESPONSE OF GRAPHENE REINFORCED POLYMER COMPOSITE FACE SHEET SANDWICH PANEL UNDER THERMAL ENVIRONMENT	SAIBABA O.S., SIVAJIRAJA G., BHAGAT V., ARUNKUMAR M.P., NAIK DESSAI A., KIRAN KUMAR REDDY R., PADHI S.N.	MATERIALS TODAY: PROCEEDINGS	2022
113	INFLUENCE OF DIETHYL ETHER ON THE DIESEL ENGINE DIVERSE CHARACTERISTICS FUELLED WITH WASTE PLASTIC BIODIESEL	SRINIVASA REDDY K., VENKATA HANUMANTHA RAO Y., DHANA RAJU V.	MATERIALS TODAY: PROCEEDINGS	2022
114	MANUFACTURING METHOD OF BSCF CATHODE FOR LOW-TEMPERATURE SOLID OXIDE FUEL CELL-A REVIEW	SUBHASHINI P.V.C.K., RAJESH K.V.D.	MATERIALS TODAY: PROCEEDINGS	2022
115	MATHEMATICAL MODELING OF OXYGEN LEVELS IN A CONTROLLED ATMOSPHERE STORE FOR PRESERVATION OF APPLE FRUITS	RAMESH BABU D., NARASIMHA RAO K.V.	MATERIALS TODAY: PROCEEDINGS	2022
116	NUMERICAL ANALYSIS ON SPACE FRAME CHASSIS OF A FORMULA STUDENT RACE CAR	KASI V RAO P., SAI KUMAR PUTSALA K., MUTHUPANDI M., MOJESWARARAO D.	MATERIALS TODAY: PROCEEDINGS	2022
117	STRUCTURAL DYNAMIC ANALYSIS OF FREIGHT RAILWAY WAGON USING FINITE ELEMENT ANALYSIS	RAO P.K.V., RAMA PRUDHVI VARMA G., SRI VIVEK K.	MATERIALS TODAY: PROCEEDINGS	2022
118	VIBRO-ACOUSTIC BEHAVIOR OF METALLIC FOAM DOUBLY-CURVED PLATES	REDDY R.K.K., GEORGE N., MOHAN S., BHAGAT V., ARUNKUMAR M.P.	MATERIALS TODAY: PROCEEDINGS	2022
119	STATISTICAL MODELING OF THE MACHINABILITY OF AN IN-SITU SYNTHESIZED RZ5/TIB2 MAGNESIUM MATRIX COMPOSITE IN DRY TURNING CONDITION	MEHER A., MAHAPATRA M.M., SAMAL P., VUNDAVILLI P.R., SHANKAR K.V.	CRYSTALS	2022
120	COMPARISON ON THE HEAT TRANSFER PERFORMANCE AND ENTROPY ANALYSIS ON MINIATURE LOOP THERMOSYPHON WITH SCREEN MESH WICK AND METAL FOAM	MANOVA S., GODSON ASIRVATHAM L., ANGELINE A.A., JERBIN S., BOSE J.R., NIMMAGADDA R., JAYASEELAN R., WONGWISES S.	CASE STUDIES IN THERMAL ENGINEERING	2022
121	EFFECT OF INJECTION PARAMETERS ON THE PERFORMANCE OF COMPRESSION IGNITION ENGINE POWERED WITH JAMUN SEED AND CASHEW NUTSHELL B20 BIODIESEL BLENDS	RAVI TEJA K.M.V., PRASAD P.I., VIJAYA KUMAR REDDY K., BANAPURMATH N.R., KALAM M.A., SALEEL C.A.	SUSTAINABILITY (SWITZERLAND)	2022
122	EXPERIMENTAL STUDY ON PERFORMANCE OF SINGLE SLOPE SOLAR STILL INTEGRATED WITH SAND TROUGHS	NAGARAJU V., MURALI G., BEWOOR A.K., KUMAR R., SHARIFPUR M., ASSAD M.E.H., AWAD M.M.	SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS	2022
123	NUMERICAL ANALYSIS ON VIBRO-ACOUSTIC BEHAVIOR OF HONEYCOMB CORE SANDWICH STRUCTURE WITH FG-CNT-REINFORCED POLYMER COMPOSITE FACINGS	BHAGAT V.S., GEORGE N., ARUNKUMAR M.P., PITCHAIMANI J., BABU M.C.L.	IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY - TRANSACTIONS OF MECHANICAL ENGINEERING	2022
124	NUMERICAL ANALYSIS OF PERFORMANCE OF VARIOUS ETL MATERIALS FOR CESIUM TITANIUM (IV) SINGLE HALIDE BASED PSCS [ЧИСЕЛЬНИЙ АНАЛІЗ ЕКСПЛУАТАЦІЙНИХ ХАРАКТЕРИСТИК РІЗНИХ МАТЕРІАЛІВ ETL ДЛЯ ПЕРОВСКІТНИХ СОНЯЧНИХ ЕЛЕМЕНТІВ НА ОСНОВІ ОДНОГАЛОГЕНІДНОГО ЦЕЗІЮ-ТИТАНУ (IV)]	CHAKRABORTY K., KUMARI S.V., ARIGELA S.H., CHOUDHURY M.G., DAS S., PAUL S.	JOURNAL OF NANO- AND ELECTRONIC PHYSICS	2022
125	PERFORMANCE STUDY OF LEAD-FREE MIXED HALIDE CS2TII6 – XBRX (WHERE X = 1 TO 5) BASED PEROVSKITE SOLAR CELL [ДОСЛІДЖЕННЯ ЕФЕКТИВНОСТІ ПЕРОВСКІТНОГО СОНЯЧНОГО ЕЛЕМЕНТУ НА ОСНОВІ БЕЗСВИНЦЕВОГО ЗМІШАНОГО ГАЛОГЕНІДУ CS2TII6 – XBRX (X = 1 ДО 5)]	CHAKRABORTY K., KUMARI S.V., ARIGELA S.H., CHOUDHURY M.G., DAS S., PAUL S.	JOURNAL OF NANO- AND ELECTRONIC PHYSICS	2022
126	WATER ABSORPTION AND THICKNESS SWELLING BEHAVIOUR OF WOVEN ROSELLE FIBRE EPOXY COMPOSITES	KAZI A.M., RAMASASTRY D.V.A., WADDAR S., SHAIKH T.M., TAMBOLI A.A.	INTERNATIONAL JOURNAL OF VEHICLE STRUCTURES AND SYSTEMS	2022
127	ANFIS BASED FORECAST AND PARAMETRIC INVESTIGATION DURING PROCESSING ACTIVITY OF AA6082T6	TAMILOLI N., VENKATESAN J., SAMPATHKUMAR T.	MATERIALS AND MANUFACTURING PROCESSES	2022
128	TIME DOMAIN AND FREQUENCY DOMAIN OF COATED MILLING INSERTS USING FFT SPECTRUM	TAMILOLI N., VENKATESAN J., RAJA RAGHU VAMSI KRISHNA P., SAMPATH KUMAR T.	MATERIALS AND MANUFACTURING PROCESSES	2022
129	EXPERIMENTAL INVESTIGATION OF DOWNSTREAM CYLINDER VIBRATIONS CAUSED BY FIV IN THE PRESENCE OF UPSTREAM STATIONARY CYLINDER	PRAVEEN B M N., AVULA V.R.	MARINE STRUCTURES	2022
130	EVALUATION OF MECHANICAL AND PHYSICAL PROPERTIES OF COCONUT FIBRE BIOCOMPOSITE REINFORCED WITH SOYA ADHESIVE	KUMAR N.S., BUDDI T., MWEMA F.M., DURGA RAJESH K.V.	PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART E: JOURNAL OF PROCESS MECHANICAL ENGINEERING	2022
131	EXPERIMENTAL INVESTIGATION AND OPTIMIZATION OF MACHINING PERFORMANCE CHARACTERISTICS DURING WEDM OF INCONEL 718: ON EVALUATION OF WIRE ELECTRODES AND ADVANCED PARAMETER TECHNIQUES	KUMAR A., UPADHYAY C.	PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART C: JOURNAL OF MECHANICAL ENGINEERING SCIENCE	2022
132	DEVELOPMENT AND EVALUATION OF A SELF-DRIVING HYBRID VEHICLE SYSTEM	K. SOMESWARA RAO	Journal of Indian intellectual traditions	2022
133	EXAMINING THE VIABILITY OF BIOFUELS AS AN ALTERNATIVE TO TRADITIONAL FUELS IN INTERNAL COMBUSTION ENGINES FOR PUBLIC TRANSPORTATION AND DECENTRALIZED POWER GENERATION	SAISARATH KRUTHIVENT	Journal of Indian intellectual traditions	2022
134	ANALYSIS OF MONOFLUIDS AND HYBRID NANOFLUIDS: SYNTHESIS, CHARACTERISTICS, EXPLORATION, AND UTILIZATION IN INTERNAL COMBUSTION ENGINES AND HEAT TRANSFER PROCESSES	ATUL BHATTAD	Journal of Indian intellectual traditions	2022
135	CORE IMPORTANCE OF THERMAL ANALYSIS IN EVALUATING BIODIESEL COMBUSTION EFFICIENCY	VINAY ATGUR	Journal of Indian intellectual traditions	2022
136	CONDUCTING EXPERIMENTAL RESEARCH ON THE PERFORMANCE AND EMISSIONS OF A LOW-SPEED DIESEL ENGINE UTILIZING DUAL INJECTION OF SOLAR-GENERATED STEAM AND PONGAMIA METHYL ESTER	G. R. K. SASTRY	Journal of Indian intellectual traditions	2022
137	CONDUCTING EXPERIMENTS WITH JATROPHA BIODIESEL AND DIESEL ADDITIVES IN AN ENGINE	Y.V. HANUMANTHA RAO	Journal of Indian intellectual traditions	2022
138	JATROPHA OIL METHYL ESTER AND ITS MIXTURES EMPLOYED AS A SUBSTITUTE FUEL IN A DIESEL ENGINE	Y. V. RAM SUDHEER VOLETI	Journal of Indian intellectual traditions	2022
139	COMPARATIVE ANALYSIS OF MECHANICAL STUDIES OF AL7075 HYBRID METAL MATRIX COMPOSITES AS A FUNCTIONALITY OF SIO2 % IN RHA	MUGUTKAR H., TAMILOLI N., KOHIR V.V.	ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING	2022
140	PROPERTIES OF AL6061/ SIC/MGO MAGNESIUM OXIDE BY USING DOUBLE STIR CASTING TECHNIQUE- A REVIEW	TAMILOLI N., RAJESH C.V.	ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING	2022
141	THERMOGRAVIMETRIC AND COMBUSTION EFFICIENCY ANALYSIS OF JATROPHA CURCAS BIODIESEL AND ITS DERIVATIVES	ATGUR V., MANAVENDRA G., DESAI G.P., RAO B.N., FATTAH I.M.R., MOHAMED B.A., SINAGA N., MASJUKI H.H.	BIOFUELS	2022
142	SOLAR ORGANIC RANKINE CYCLE - PARAMETRIC ANALYSIS BASED ON EXERGY VS ENERGY APPROACHES	SAMUEL N., SRINATH A., SHARMA N., TAMMANA A.K., SHAMEER BASHA M.	JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY	2022
143	NUMERICAL AND EXPERIMENTAL INVESTIGATION OF NON-LUBRICATED AIR SCROLL EXPANDER DERIVED FROM A REFRIGERANT SCROLL COMPRESSOR	KOTTAPALLI A., KONIJETI R.	FRONTIERS IN HEAT AND MASS TRANSFER	2022
144	THERMAL BEHAVIOR OF DIESEL, HONGE OIL METHYL ESTER AND ITS B-20 BLEND IN ATMOSPHERIC AIR AND OXYGEN	ATGUR V., MANAVENDRA G., DESAI G.P., BANAPURMATH N.R., VADLAMUDI C., KRISHNAPPA S., RAO B.N.	INTERNATIONAL JOURNAL OF SUSTAINABLE ENGINEERING	2022
145	DESIGN OF IOT-BASED MECHATRONIC MODULE FOR REAL-TIME YIELD MONITORING DURING HARVESTING OF GREENHOUSE PRODUCE AND VINEYARDS	KOLHALKAR N.R., KRISHNAN V.L., SOMKUWAR R.G., PANDIT A.A.	INTERNATIONAL REVIEW OF MECHANICAL ENGINEERING	2022
146	IMPROVEMENT OF THERMAL PERFORMANCE OF A SOLAR BOX TYPE COOKER USING SIO2/TIO2 NANOLAYER	THAMIZHARASU P., SHANMUGAN S., GORJIAN S., PRUNCU C.I., ESSA F.A., PANCHAL H., HARISH M.	SILICON	2022
147	INVESTIGATION OF MACHINABILITY AND GEOMETRY CHARACTERISTICS OF ABRASIVE WATERJET CIRCULAR CUTTING PROCESS ON TI-6AL-4V ALLOY	KARUPPUSAMY U., DAKSHINAMURTHY D., IBRAHIM R.B.S.	SURFACE REVIEW AND LETTERS	2022
148	PROPHECY OF WEAR RATE AND MICROHARDNESS OF COMMERCIAL MATERIALS BY EXPERIMENTATION AND ARTIFICIAL NEURAL NETWORKS	YAKKALURI P.R., KAVULURU L.N., MANTRALA K.M., BODDAPATI M.T.P.	JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY	2022
149	OPTIMIZATION OF PROCESS PARAMETERS USING DIFFERENT STATISTICAL DESIGNS	VARALAKSHMI M., LAKSHMI R.K., RAO N.B.	JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY	2022
150	CARBON-FILLED E-GLASS FIBRE-REINFORCED EPOXY COMPOSITE: EROSIVE WEAR PROPERTIES AT AN ANGLE OF IMPINGEMENT	SRAVANTHI K., MAHESH V., RAO B.N., FERNANDEZ G., HAITER L.A.	ADVANCES IN MATERIALS SCIENCE AND ENGINEERING	2022
151	DESIGN AND FABRICATION OF PATIENT-SPECIFIC IMPLANT FOR MAXILLOFACIAL SURGERY USING ADDITIVE MANUFACTURING	KOPPUNUR R., DAMA K.K., ROKKALA U., THIRUPATHI B., SAGAR N.V.S.S., GUGULOTHU B.	ADVANCES IN MATERIALS SCIENCE AND ENGINEERING	2022
152	A COMPREHENSIVE STUDY OF CERAMIC MATRIX COMPOSITES FOR SPACE APPLICATIONS	DHANASEKAR S., GANESAN A.T., RANI T.L., VINJAMURI V.K., NAGESWARA RAO M., SHANKAR E., DHARAMVIR, KUMAR P.S., MISGANAW GOLIE W.	ADVANCES IN MATERIALS SCIENCE AND ENGINEERING	2022
153	INVESTIGATION AND PROCESS PARAMETER OPTIMIZATION ON WIRE ELECTRIC DISCHARGE MACHINING OF ALUMINIUM 6082 ALLOY	MURALI G., MURUGAN M., ARUNKUMAR K., ELUMALAI P.V., MOHANRAJ D., PRABHAKAR S.	ADVANCES IN MATERIALS SCIENCE AND ENGINEERING	2022
154	STRAIN-CUM-DEFORMATION ANALYSIS OF FRICTION STIR WELDED AA5052 AND AA6061 SAMPLES WITH MICROSTRUCTURAL ANALYSIS	PRABAHARAN T., SREEKARA REDDY M.B.S., BOVAS HERBERT BEJAXHIN A., RAMANAN, POTHAMSETTY KASI V., JENARIS	JOURNAL OF MINES, METALS AND FUELS	2022
155	AN EXACT SOLUTION FOR VIBRO-ACOUSTIC RESPONSE OF SMART SANDWICH PANELS WITH MEE COMPOSITE LAYER	ARUNKUMAR M.P., BHAGAT V., GENG Q., LI Y., PITCHAIMANI J.	COMPOSITE STRUCTURES	2022
156	SELF-HEALING OF MATRIX CRACKING AND DELAMINATION DAMAGE ASSESSMENT IN MICROCAPSULES REINFORCED CARBON FIBRE EPOXY COMPOSITE UNDER FLEXURAL LOADING	KUMAR PITTALA R., DHANARAJU G., SATISH BEN B., AVINASH BEN B.	COMPOSITE STRUCTURES	2022
157	IOT-BASED SOLAR ENERGY MEASUREMENT AND MONITORING MODEL	CHITRA L., GOWRI N.V., MAHESWARI M., UIKE D., MEDIKONDU N.R., AL-AMMAR E.A., METWALLY A.S.M., ISLAM A., DIRIBA A.	INTERNATIONAL JOURNAL OF PHOTOENERGY	2022
158	CHARACTERIZATION OF CONTINUOUS HIBISCUS SABDARIFFA FIBRE REINFORCED EPOXY COMPOSITES	KAZI A.M., DVA R.	POLYMERS AND POLYMER COMPOSITES	2022
159	CHARACTERIZATION OF INTERWOVEN ROSELLE/SISAL FIBER REINFORCED EPOXY COMPOSITES	KAZI A.M., D. V. A. R., WADDAR S.	POLYMER COMPOSITES	2022
160	PREPARATION AND CHARACTERIZATION OF OPUNTIA-CLADODE FIBER AND CITRON PEEL BIOCHAR TOUGHENED EPOXY BIOCOMPOSITE	SENTHIL KANNAN N., NAGABHOOSHANAM N., KUMAR A., V. RAO P.K., PATIL P.P., KALA BHARATHI B.V.V.L.	POLYMER COMPOSITES	2022
161	EXPERIMENTAL INVESTIGATION ON SURFACE CHARACTERISTICS OF TI6AL4V ALLOY DURING ABRASIVE WATER JET MACHINING PROCESS	SAMI ABUSHANAB W., MOUSTAFA E.B., HARISH M., SHANMUGAN S., ELSHEIKH A.H.	ALEXANDRIA ENGINEERING JOURNAL	2022
162	PARAMETERS SELECTION FOR ENHANCED MECHANICAL AND WEAR PROPERTIES OF NATURAL FIBER REINFORCED HYBRID COMPOSITES USING PSI TECHNIQUE	REDDY P.V., REDDY R.M., RAO P.S., KRISHNUDU D.M., REDDY R.V.S., KUMAR A.E.	JOURNAL OF NATURAL FIBERS	2022
163	MILLING PARAMETERS ON AA-6082-T6 ALLOY USING GREY RELATIONAL ANALYSIS, REGRESSION, ANN, AND GA MODELS	TAMILOLI N., VENKATESAN J., KUMAR T.S., ASHWIN A.J., KALITCHIN Z.	JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION	2022
164	OPTIMIZATION OF CHIP THICKNESS, ROUNDNESS, AND SURFACE ROUGHNESS OF DRY TURNED COMPONENT USING GREY RELATIONAL ANALYSIS	TAMILOLI N., KALITCHIN ZH., VENKATESAN J.	JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION	2022
165	A REVIEW ON MANUFACTURABILITY OF MAGNESIUM MATRIX COMPOSITES: PROCESSING, TRIBOLOGY, JOINING, AND MACHINING	MEHER A., MAHAPATRA M.M., SAMAL P., VUNDAVILLI P.R.	CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY	2022
166	A REVIEW ON THE HEAT TRANSFER PERFORMANCE OF PULSATING HEAT PIPES	RAJALE M.J., PRASAD P.I., RAO B.N.	AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING	2022
167	HYBRID SWARM-BASED INTELLIGENT ALGORITHM FOR LATTICE STRUCTURE OPTIMIZATION IN ADDITIVE MANUFACTURING SYSTEM	KODURU J.P., NARAYANA K.L., MANTRALA K.M.	INTERNATIONAL JOURNAL ON INTERACTIVE DESIGN AND MANUFACTURING	2022
168	COMPARATIVE ANALYSIS OF MULTI CRITERIA DECISION MAKING TECHNIQUES FOR SELECTION OF OPTIMAL FLAX FIBER REINFORCED COMPONENTS	K AMARNATH., K JAYANENDRA BABU., M V SATISH KUMAR	POSITIF JOURNAL	2022
169	EXPERIMENTAL INVESTIGATION AND SURFACE QUALITY PARAMETERS OPTIMIZATION IN WEDM MACHINING OF D-SERIES TOOL STEELS	MANIKYAM S.; KUMAR P.J.	ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES	2022

S.No	Title of the Paper	Name of the authors	Title of the journal	Year
1	SPECIFIC OPTIMAL AWJM PROCESS PARAMETERS FOR TI-6AL-4V ALLOY EMPLOYING THE MODIFIED TAGUCHI APPROACH	HARISH M., SRINIVASA RAO S., NAGESWARA RAO B., MAHABOOB B., PRAVEEN J.P., INDRA REDDY A.	JOURNAL OF MATHEMATICAL AND COMPUTATIONAL SCIENCE	2021
2	INFLUENCE OF CARBON PARTICLE IN POLYMER MATRIX COMPOSITE OVER MECHANICAL PROPERTIES AND TRIBOLOGY BEHAVIOR	SRAVANTHI K., MAHESH V., RAO B.N.	ARCHIVES OF METALLURGY AND MATERIALS	2021
3	MODELLING AND PARAMETRIC ANALYSIS OF WIRE FINNED COILED TUBE HEAT EXCHANGER IN A SMALL J-T REFRIGERATOR	KRUTHIVENTI S.S., RASU N.G., HANUMANTH RAO Y.V.	INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY	2021
4	COMPARATIVE ANALYSIS OF PERFORMANCE, EMISSION, AND COMBUSTION CHARACTERISTICS OF A COMMON RAIL DIRECT INJECTION DIESEL ENGINE POWERED WITH THREE DIFFERENT BIODIESEL BLENDS	TEJA K.M.V.R., PRASAD P.I., REDDY K.V.K., BANAPURMATH N.R., SOUDAGAR M.E.M., HOSSAIN N., AFZAL A., SALEEL C.A.	ENERGIES	2021
5	EXPERIMENTAL INVESTIGATION ON THE EFFECT OF COMPRESSION RATIO OVER EMISSION AND PERFORMANCE CHARACTERISTICS OF THE DIESEL ENGINE USING TERNARY BLENDS	MORE G.V., RAO Y.V.H., PRASAD P.I., RAO B.N.	INTERNATIONAL JOURNAL OF GREEN ENERGY	2021
6	IMPACT OF INJECTION TIMINGS AND EXHAUST GAS RECIRCULATION RATES ON THE CHARACTERISTICS OF DIESEL ENGINE OPERATED WITH NEAT TAMARIND BIODIESEL	BALA PRASAD K., DHANA RAJU V., AHAMAD SHAIK A., GOPIDESI R.K., SREEKARA REDDY M.B.S., SOUDAGAR M.E.M., MUJTABA M.A.	ENERGY SOURCES, PART A: RECOVERY, UTILIZATION AND ENVIRONMENTAL EFFECTS	2021
7	BIOIMPLANTS AND BIOMATERIALS: A REVIEW	RANGANATH L., SRINATH A.	TRENDS IN BIOMATERIALS AND ARTIFICIAL ORGANS	2021
8	BREAKING BOUNDARIES IN 3D BONE PRINTING: A STUDY OF ADDITIVE MANUFACTURING USING INVESALIUS SOFTWARE	LOLLA R., SRINATH A.	TRENDS IN BIOMATERIALS AND ARTIFICIAL ORGANS	2021
9	DESIGN AND ANALYSIS OF FOOTPLATE USING COMPOSITE MATERIAL FOR PARTIAL FOOT AMPUTATION	WAGLE C., PADHI S.N.	TRENDS IN BIOMATERIALS AND ARTIFICIAL ORGANS	2021
10	ELECTROCHEMICAL DRILLING AND MULTI RESPONSE OPTIMIZATION USING DIFFERENT METHODS OF ASSIGNING WEIGHTS TO THE RESPONSES FOR SUSTAINABLE MACHINING OF AA6061-TIB2 IN-SITU COMPOSITES	CHANDRASEKHAR S., PRASAD N.B.V.	SONGKLANAKARIN JOURNAL OF SCIENCE AND TECHNOLOGY	2021
11	FABRICATION AND TORSIONAL STRENGTH EVALUATION OF A GLASS FIBER EPOXY COMPOSITE SHAFT	JAGADALE V., PADHI S.N.	INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES	2021
12	EFFECT OF THERMAL CONDUCTIVITY OF SUBSTRATE BOARD FOR TEMPERATURE CONTROL OF ELECTRONIC COMPONENTS: A NUMERICAL STUDY	KURHADE A.S., RAO T.V., MATHEW V.K., G. PATIL N.	INTERNATIONAL JOURNAL OF MODERN PHYSICS C	2021
13	A REVIEW ON HYBRID THERMAL MANAGEMENT OF BATTERY PACKS AND IT'S COOLING PERFORMANCE BY ENHANCED PCM	MURALI G., SRAVYA G.S.N., JAYA J., NAGA VAMSI V.	RENEWABLE AND SUSTAINABLE ENERGY REVIEWS	2021
14	POWER GENERATION THROUGH RENEWABLE ENERGIES - AN IDEA FOR APPLICATION IN PASSENGER TRAINS	RAO K.S., SRINATH A.	AIP CONFERENCE PROCEEDINGS	2021
15	DESIGN AND ANALYSIS OF AN AUTONOMOUS HYBRID VEHICLE	RAO K.S., SRINATH A., RAO G.B.	AIP CONFERENCE PROCEEDINGS	2021
16	EXPERIMENTAL INVESTIGATION ON MECHANICAL, WEAR AND CORROSIVE PROPERTIES OF AA6061-TIB2IN-SITU COMPOSITES PRODUCED BY K2TIF6-KBF4REACTION SYSTEM AT OPTIMUM HOLDING TIME	CHANDRASEKHAR S., PRASAD N.B.V.	AIP CONFERENCE PROCEEDINGS	2021
17	PREDICTION ABOUT THE INFLUENCE OF NANO GRAPHENE PARTICLES ON TRIBOLOGICAL PROPERTIES OF STEEL UNDER DRY AND WET CONDITIONS	REDDY Y.P., NARAYANA K.L., MALLIK M.K., BASHA S.J.	AIP CONFERENCE PROCEEDINGS	2021
18	STRUCTURAL AND MAGNETODIELECTRIC PROPERTIES OF BIFEO3-GDMNO3 MULTIFERROICS	MASSO, R; TRIPATHY, SN; APONTE, FA; PRADHAN, DK; MARTINEZ, R; PALAI, R	MATERIALS RESEARCH EXPRESS	2021
19	FABRICATION OF VARIABLE SPEED LAMINA CUTTING MACHINE	GAJAVALLI VENKATA PAVAN GOPI NIKHIL., NADENDLA SRINIVASABABU	ADVANCES IN INTELLIGENT SYSTEMS AND COMPUTING	2021
20	AVOID ACCIDENTS BY USING DISTANCE MEASURING SYSTEM IN INDUSTRIES	A BHATTADA, D S C MANIKANTA, S K VAJEER BABAC, P PAVAN KUMARD, N CHARLES ANAND	PSYCHOLOGY AND EDUCATION	2021
21	PRIORITIZATION OF TECHNICAL REQUIREMENTS OF AN AUTOMOBILE BRAKING SYSTEM USING FUZZY LOGARITHMIC LEAST SQUARE METHOD	ABDUL MUNAF SHAIK., V V S KESAVA RAO., SRINIVASA RAO., K V DURGA RAJESH	DESIGN ENGINEERING	2021
22	DYNAMIC ANALYSIS OF AN INTEGRATED MICRO-END MILL SPINDLE	JEEVAN RAJU B., RAMA KOTAIAH K., JAKEER HUSSAIN SHAIK	TURKISH ONLINE JOURNAL OF QUALITATIVE INQUIRY	2021
23	OPTIMAL MODELING OF END-MILL SPINDLE FOR IMPROVING THE CUTTING STABILITY	JEEVAN RAJU ., RAMA KOTAIAH K., JAKEER HUSSAIN SHAIK	TURKISH ONLINE JOURNAL OF QUALITATIVE INQUIRY (TOJQI)	2021
24	A HYBRID INBOUND TRADITIONAL TRADE ORDERS AUTOMATION WITH DATA VALIDATION AND ANALYSIS	SAM SEKHAR M, P VENKATA CHALAPATHI	INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING	2021
25	ARTIFICIAL NEURAL NETWORK AND FINITE ELEMENT INVESTIGATION OF CRACKED ROTOR SHAFT	A H KEKAN., B RAGHU KUMAR	TURKISH JOURNAL OF COMPUTER AND MATHEMATICS EDUCATION	2021
26	DESIGN AND OPTIMIZED ANALYSIS OF HIGH SPEED PRECISE MACHINE TOOL SPINDLES	B JEEVAN RAJU., RAMA KOTAIAH K., JAKEER HUSSAIN SHAIK	TURKISH JOURNAL OF COMPUTER AND MATHEMATICS EDUCATION	2021
27	GREEN MEDIATED SYNTHESIS OF MACROPOROUS HIERARCHICAL CEO2 NANOPARTICLES USING MIMOSA PUDICA LEAF EXTRACT FOR HUMIDITY SENSING APPLICATION	KULKARNI N., NAVINDAGI M.C., KRISHNA M.V.S.M., KUSHNOORE S.	ASIAN JOURNAL OF CHEMISTRY	2021
28	AN INVESTIGATION ON LASER WELDING PARAMETERS ON THE STRENGTH OF TRIP STEEL	KHOT RAHUL S., RAO T.V., NATU H., GIRISH H.N., ISHIGAKI T., MADHUSUDAN P.	STROJNISKI VESTNIK/JOURNAL OF MECHANICAL ENGINEERING	2021
29	MULTI-OBJECTIVE OPTIMIZATION OF PROCESS PARAMETERS FOR POWDER MIXED ELECTRICAL DISCHARGE MACHINING OF INCONEL X-750 ALLOY USING TAGUCHI-TOPSIS APPROACH	KHADAR B.S., JAGANNADHA R.M.V., MURAHARI K.	STROJNICKY CASOPIS	2021
30	EXPERIMENTAL INVESTIGATION AND NUMERICAL SIMULATION ON THE STRENGTH OF CARBON-FIBER-REINFORCED POLYMER–METAL BOLTED AND BONDED INTERFACES	KRISHNADASAN C.K., SHANMUGAM N.S., RAO B.N., SIVASUBRAMONIAN B.	JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE	2021
31	PREDICTION OF CORROSION PROPERTIES OF LENSTM DEPOSITED COBALT, CHROMIUM AND MOLYBDENUM ALLOY USING ARTIFICIAL NEURAL NETWORKS	SHAIK N.B., MANTRALA K.M., NARAYANA K.L.	INTERNATIONAL JOURNAL OF MATERIALS AND PRODUCT TECHNOLOGY	2021
32	CONJUGATE HEAT TRANSFER PERFORMANCE OF STEPPED LID-DRIVEN CAVITY WITH AL2O3/WATER NANOFLUID UNDER FORCED AND MIXED CONVECTION	JANJANAM N., NIMMAGADDA R., ASIRVATHAM L.G., HARISH R., WONGWISES S.	SN APPLIED SCIENCES	2021
33	INVESTIGATION ON THE PERFORMANCE AND EMISSIONS PROFILE OF CI ENGINE USING CASHEW NUT SHELL PYRO OIL–TOLUENE–DIESEL BLENDS	VENKATESAN K.	SN APPLIED SCIENCES	2021
34	MULTI-OBJECTIVE OPTIMIZATION OF AAJM PROCESS PARAMETERS FOR CUTTING OF B4C/GR PARTICLES REINFORCED AL 7075 COMPOSITES USING RSM-TOPSIS APPROACH	KOLLI M., RAM PRASAD A.V.S., NARESH D.S.	SN APPLIED SCIENCES	2021
35	PERFORMANCE ANALYSIS OF SILANE GRAFTED NANOSILICA AND ARAMID FIBRE-REINFORCED EPOXY COMPOSITE IN DYNAMIC LOADING AND ENERGY APPLICATION	DHARMAVARAPU P., REDDY M.B.S.S.	EMERGENT MATERIALS	2021
36	INFLUENCE OF TRANSVERSE VIBRATIONS ON CONVECTIVE HEAT TRANSFER IN PARALLEL FLOW TUBE-IN-TUBE HEAT EXCHANGER	ARASAVELLI S.S., KONIJETI R., BUDDA G.R.	HEAT TRANSFER	2021
37	DESIGN AND PERFORMANCE EVALUATION OF A NOVEL END-EFFECTOR WITH INTEGRATED GRIPPER CUM CUTTER FOR HARVESTING GREENHOUSE PRODUCE	KOLHALKAR N.R., KRISHNAN V.L., PANDIT A.A., SOMKUWAR R.G., SHAAIKH J.A.	INTERNATIONAL JOURNAL OF ADVANCED TECHNOLOGY AND ENGINEERING EXPLORATION	2021
38	MATHEMATICAL MODELING AND MULTI RESPONSE OPTIMIZATION FOR IMPROVING MACHINABILITY OF ALLOY STEEL USING RSM, GREY RELATIONAL ANALYSIS AND JAYA ALGORITHM	VENKATA VISHNU A., SUDHAKAR BABU S.	INTERNATIONAL JOURNAL OF ENGINEERING TRANSACTIONS C: ASPECTS	2021
39	MECHANICAL COMPRESSION PROPERTIES OF APPLE FRUIT: ERRORS DURING PENETROMETER MEASUREMENTS	RAMESH BABU D., NARASIMHA RAO K.V.	LECTURE NOTES ON DATA ENGINEERING AND COMMUNICATIONS TECHNOLOGIES	2021
40	MULTI-OBJECTIVE OPTIMIZATION WITH MODIFIED TAGUCHI APPROACH TO SPECIFY OPTIMAL ROBOT SPRAY PAINTING PROCESS PARAMETERS	DANTHALA S., SRINIVASA RAO S., NAGESWARA RAO B., MANNEPALLI K.	INTERNATIONAL JOURNAL OF NONLINEAR ANALYSIS AND APPLICATIONS	2021
41	MATHEMATICAL MODELLING AND ANALYSIS OF HYBRID SOLAR DESALINATION SYSTEM USING EVACUATED TUBE COLLECTOR (ETC) AND COMPOUND PARABOLIC CONCENTRATOR (CPC)	KEDAR S., MURALI G., BEWOOR A.K.	MATHEMATICAL MODELLING OF ENGINEERING PROBLEMS	2021
42	EXPERIMENTAL CHARACTERIZATION OF MECHANICAL PROPERTIES AND MICROSTRUCTURE STUDY OF POLYCARBONATE (PC) REINFORCED ACRYLONITRILE-BUTADIENE-STYRENE (ABS) COMPOSITE WITH VARYING PC LOADINGS	KUMAR M., RAMAKRISHNAN R., OMARBEKOVA A., SANTHOSH K.R.	AIMS MATERIALS SCIENCE	2021
43	OPTIMAL WELD BEAD PROFILES IN THE CONDUCTION MODE LBW OF THIN TI–6AL–4V ALLOY SHEETS	MOOLI H., SEERAM S.R., GOTETI S., BOGGARAPU N.R.	AIMS MATERIALS SCIENCE	2021
44	DETECTION OF FAULTS AND VIBRATION ANALYSIS IN BEAM STRUCTURES-A REVIEW	MADISETTY K.K., GARIKAPATI D., JENA S.P.	INCAS BULLETIN	2021
45	EXPERIMENTAL INVESTIGATION ON THERMAL CONDUCTIVITY AND THERMAL DEGREDATION OF HONGE OIL METHYL ESTER WITH B-20 BLEND	ATGUR V., MANAVENDRA G., DESAI G.P., RAO B.N.	JOURNAL OF THERMAL ENGINEERING	2021
46	POSITIVE IMPACT OF VIBRATION ON HEAT TRANSFER IN TWISTED TAPE INSERTED HEAT EXCHANGER	ARASAVELLI S.S., KONIJETI R., BUDDA G.R.	JOURNAL OF THERMAL ENGINEERING	2021
47	OPTIMIZATION OF MONOLITHS FOR CATALYTIC CONVERTER AND REDUCTION OF ATMOSPHERIC POLLUTION DUE TO AUTOMOBILE EXHAUST	KS CHALAPATHI., TV RAO	JOURNAL OF GREEN ENGINEERING	2021
48	OPTIMIZATION OF 3D PRINTING PROCESS PARAMETER USING TAGUCHI APPROACH	R LOLLA., C GANTEDA., R L KOTTAPALLI., G LORENZINI	JOURNAL OF MECHANICAL ENGINEERING RESEARCH AND DEVELOPMENTS	2021
49	EXPERIMENTAL INVESTIGATION ON THE RATE OF COOLING AND HARDNESS DURING ARTIFICIAL RIPENING OF PINEAPPLE FRUITS	K V NARASIMHA RAO., GASIGANTI SUMITH., K VENKATESAN., D RAMESH BABU	ANNALS OF THE ROMANIAN SOCIETY FOR CELL BIOLOGY	2021
50	ROLE OF 3D PRINTED MEDICAL MODELS IN COMPLEX SURGERIES	RAKESH KOPPUNUR., KIRAN KDAMA., SANTOSH KUMAR MALYALA., CHITRA CHAKRAVARTHY	ANNALS OF THE ROMANIAN SOCIETY FOR CELL BIOLOGY	2021
51	STATE OF THE ART ON SURGICAL TECHNIQUES IN ELBOW FRACTURE TREATMENT USING SURGICAL GUIDES	H NAIDU., K KUMAR DAMA., S KUMAR MALYALA	ANNALS OF THE ROMANIAN SOCIETY FOR CELL BIOLOGY	2021
52	INVESTIGATION OF EFFECTS OF WORKING PARAMETERS INTURNING OF TWIP STEEL RODS WITH ECO-FRIENDLY CUTTINGFLUIDS USING RESPONSE SURFACE METHODOLOGY ON CNC MACHINES	A SURESHA., G DÄ°WAKAR	GAZI UNIVERSITY JOURNAL OF SCIENCE ·	2021
53	ADOPTING ARTIFICIAL INTELLIGENCE FOR SMART HOME	K KISHORE KUMAR, DURGA PRASAD VISSAMSETTY, A SRINATH, T V SIVA SANKAR, CHAITANYA R	TEST ENGINEERING AND MANAGEMENT	2021
54	DESIGN AND SIMULATION OF MECHANICAL VENTILATOR WITH SELF-INFLATING BAG	YEDUKONDALU GANDHAM	TURKISH JOURNAL OF PHYSIOTHERAPY AND REHABILITATION	2021
55	STUDY OF MECHANICAL PROPERTIES AND MICROSTRUCTURAL BEHAVIOUR OF ALPHA- BETA BRASS AT ELEVATED TEMPERATURE	CHALLA B., RAO S.S.	E3S WEB OF CONFERENCES	2021
56	FINITE ELEMENT SIMULATION OF AISI 1025 AND AL6061 SPECIMEN WITH COATED AND UNCOATED TOOLS ON TURNING PROCESS USING DEFORM-3D	RAJESH K.V.D., SHAIK A.M., PRASAD A.V.S.R., BUDDI T., MWEMA F.M.	E3S WEB OF CONFERENCES	2021
57	STRUCTURAL ANALYSIS OF MOTORCYCLE ALLOY WHEEL	KARTEEK N., RAO P.K.V., RAVI PRAKASH BABU K., MOJESHWARA RAO D.	E3S WEB OF CONFERENCES	2021
58	WAVINESS EFFECT OF FIBER ON BUCKLING BEHAVIOR OF SISAL/CARBON NANOTUBE REINFORCED COMPOSITES USING EXPERIMENTAL FINITE ELEMENT METHOD	PHANI PRASANTHI P., SIVAJI BABU K., ESWAR KUMAR A.	INTERNATIONAL JOURNAL OF ENGINEERING, TRANSACTIONS B: APPLICATIONS	2021
59	VIBRO-ACOUSTIC CHARACTERISTICS OF VISCOELASTIC SANDWICH PANEL: EFFECT OF INHERENT DAMPING	REDDY R.K.K., ARUNKUMAR M.P., BHAGAT V., REDDY M.B.S.S.	INTERNATIONAL JOURNAL OF DYNAMICS AND CONTROL	2021
60	CONDITION MONITORING OF ROLLING CONTACT BEARING BY VIBRATION SIGNATURE ANALYSIS	MUNDE K., KONDHALKAR G.	LECTURE NOTES IN MECHANICAL ENGINEERING	2021
61	ANALYSIS ON DIFFERENT TYPES OF VISCOMETERS, DESIGN, MATERIALS, AND TECHNOLOGY: A REVIEW	BANKAR P.S., REDDY M.B.S.S.	LECTURE NOTES IN MECHANICAL ENGINEERING	2021
62	COMPUTATIONAL ANALYSIS OF CONCENTRATING SOLAR BOILER USES WITH AND WITHOUT GRAPHENE COATING	HUSSAIN M.A., NAGAKALYAN S., PRAKASHBABU M.	LECTURE NOTES IN MECHANICAL ENGINEERING	2021
63	TOMOGRAPHIC RECONSTRUCTION OF ISOTROPIC MATERIALS USING GENETIC ALGORITHMS WITH ULTRASOUND TIME-OF-FLIGHT PROJECTION DATA	KODALI S.P., RAO B.N.	JOURNAL OF COMPUTATIONAL AND APPLIED RESEARCH IN MECHANICAL ENGINEERING	2021
64	ANALYZING THE MECHANICAL BEHAVIOR OF IPN COMPOSITE DRIVE SHAFT WITH E-GLASS FIBER REINFORCEMENT	SURESH G., SRINIVASAN T., BERNARD S.S., VIVEK S., AKASH R.M., BARADHAN G., ANAND B.	MATERIALS TODAY: PROCEEDINGS	2021
65	AN ANALYSIS ON MECHANICAL AND SLIDING WEAR BEHAVIOR OF E-GLASS FIBER REINFORCED IPN COMPOSITES	RAJAMAHENDRAN S., SURESH G., SRINIVASAN T., LOGESH D., YUSUF M.M., KRISHNAN L.M.	MATERIALS TODAY: PROCEEDINGS	2021
66	A STUDY ON SLIDING WEAR BEHAVIOUR OF CARBON FIBER REINFORCED IPN COMPOSITES	SURESH G., SRINIVASAN T., CHIDAMBARAM C.T., SANTHOSHPRIYA K., VIJAYAKUMAR K.R., KUMAR M.D.	MATERIALS TODAY: PROCEEDINGS	2021
67	COMBUSTION ANALYSIS OF SINGLE CYLINDER DIESEL ENGINE OPERATED ON DUAL FUEL MODE	KOLI S.R., HANUMANTHA RAO Y.V.	MATERIALS TODAY: PROCEEDINGS	2021
68	EFFECT OF HYGROTHERMAL AGEING ON THE COMPRESSIVE BEHAVIOR OF GLASS FIBER REINFORCED IPN COMPOSITE PIPES	SRINIVASAN T., SURESH G., RAMU P., VIGNESH R., HARSHAN A.V., VIGNESH K.P.	MATERIALS TODAY: PROCEEDINGS	2021
69	EFFECT OF WATER ABSORPTION OF THE MECHANICAL BEHAVIOR OF BANANA FIBER REINFORCED IPN NATURAL COMPOSITES	SRINIVASAN T., SURESH G., RAMU P., RAM V.G., GIRESH M., ARJUN K.	MATERIALS TODAY: PROCEEDINGS	2021
70	EXPERIMENTAL ANALYSIS ON MECHANICAL PROPERTIES OF BANANA FIBRE/EPOXY (PARTICULATE) REINFORCED COMPOSITE	SRINIVASAN T., SURESH G., SANTHOSHPRIYA K., CHIDAMBARAM C.T., VIJAYAKUMAR K.R., MUNAF A.A.	MATERIALS TODAY: PROCEEDINGS	2021
71	INVESTIGATION OF HARDNESS &AMP; TRIBOLOGY BEHAVIOR OF EPOXY AND SIO2 COMPOSITE: AN EXPERIMENTAL STUDY	BHARADWAJA K., RAO S.S., RAO T.B.	MATERIALS TODAY: PROCEEDINGS	2021
72	MACHINABILITY STUDIES OF LEAD INDUCED TI-6AL-4V ALLOY USING TAGUCHI TECHNIQUE ON WEDM PROCESS	RAM PRASAD A.V.S., RAMJI K., KOLLI M.	MATERIALS TODAY: PROCEEDINGS	2021
73	SYNTHESIS AND EVALUATION OF MECHANICAL PROPERTIES FOR COCONUT FIBER COMPOSITES-A REVIEW	SHRAVAN KUMAR N., BUDDI T., ANITHA LAKSHMI A., DURGA RAJESH K.V.	MATERIALS TODAY: PROCEEDINGS	2021
74	ANALYZING THE MECHANICAL BEHAVIOUR OF SISAL FIBER REINFORCED IPN MATRIX	BERNARD S.S., SURESH G., SRINIVASAN T., SRINIVASAN S., KAARMUGILAN N., NAVEED L.M., KIRANMOULI N., MAHALAKSHMI C.S.	MATERIALS TODAY: PROCEEDINGS	2021
75	AN OVERVIEW OF REFINEMENTS, PROCESSING METHODS AND PROPERTIES OF NATURAL FIBER COMPOSITES	DASORE A., RAJAK U., BALIJEPALLI R., VERMA T.N., RAMAKRISHNA K.	MATERIALS TODAY: PROCEEDINGS	2021
76	COMPARATIVE NUMERICAL INVESTIGATION OF RECTANGULAR AND ELLIPTICAL FINS FOR AIR COOLED IC ENGINES	DASORE A., RAJAK U., KONIJETI R., BALIJEPALLI R., PRAHLADA RAO K., GANTEDA C.K., VERMA T.N.	MATERIALS TODAY: PROCEEDINGS	2021
77	IMPLEMENTATION OF ONLINE AND OFFLINE PRODUCT SELECTION SYSTEM USING FCNN DEEP LEARNING: PRODUCT ANALYSIS	MOHAMMAD M.N., KUMARI CH.U., MURTHY A.S.D., JAGAN B.O.L., SAIKUMAR K.	MATERIALS TODAY: PROCEEDINGS	2021
78	INVESTIGATION OF TENSILE AND FLEXURAL BEHAVIOR OF EPOXY AND SIO2 COMPOSITE: AN EXPERIMENTAL STUDY	BHARADWAJA K., RAO S.S., RAO T.B.	MATERIALS TODAY: PROCEEDINGS	2021
79	NUMERICAL ANALYSIS OF THERMAL ENERGY STORAGE SYSTEMS USING NOVEL COMPOSITE PHASE CHANGE MATERIALS	CH S.S.C., KONIJETI R., DASORE A., RAJAK U.	MATERIALS TODAY: PROCEEDINGS	2021
80	EXPERIMENTAL INVESTIGATION ON WEDM PERFORMANCE ANALYSIS USING GREY-FUZZY INTEGRATED WITH TLBO ALGORITHM FOR INCONEL 625: COMPARISON WITH GA AND SA	KUMAR A., UPADHYAY C., SHASHIKANT	WORLD JOURNAL OF ENGINEERING	2021
81	CONTEMPORARY REVIEW: USE OF MAHUA OIL AND WASTE PLASTIC OIL AS BIOFUELS	KUNDURU S.R., VENKATA H.R.Y., VALLAPUDI D., DHEENADHAYALAN N., KUMARAVEL A.R.	INTERNATIONAL JOURNAL OF RENEWABLE ENERGY RESEARCH	2021
82	INFLUENCE OF COMBUSTION CHAMBER SHAPES AND NOZZLE GEOMETRY ON PERFORMANCE, EMISSION AND COMBUSTION CHARACTERISTICS OF CRDI ENGINE POWERED WITH BIODIESEL BLENDS	RAVI TEJA K.M.V., ISSAC PRASAD P., VIJAYA KUMAR REDDY K., BANAPURMATH N.R., SOUDAGAR M.E.M., YUNUS KHAN T.M., BADRUDDIN I.A.	SUSTAINABILITY (SWITZERLAND)	2021
83	PROTECTING GREENARY THROUGH DIGITALISATION OF THEORY PAPER BASED EXAMINATIONS WITH AUTOMATION IN EVALUATION SYSTEM	KISHORE KUMAR K., BHAVANA D., REVANTH PHANI SAI M., MAHIDHAR S.T.P., SAI SINDHU G.	JOURNAL OF GREEN ENGINEERING	2021
84	VOICE CONTROLLED AND OBSTACLES AVOIDANCE AUTOMATIC ROBOTIC VEHICLE FOR ENVIRONMENT SAFETY	SRIKRISHNA KARTHIK T., KISHORE KUMAR K., HEMAPRIYA T., MANI CHANDU S., GOPISAI T.	JOURNAL OF GREEN ENGINEERING	2021
85	CHARACTERIZATION OF TRIBOLOGICAL AND MECHANICAL PROPERTIES OF SS-304 COATED WITH CO-CR-MO ALLOY WITH 5% HCL SOLUTION	SHAIK A.M., NARAYANA K.L., RAJESH K.V.D., MALLIK M.K., REDDY Y.P.	ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES	2021
86	MECHANICAL CHARACTERIZATION OF STACKED ROSELLE FIBRE COMPOSITES: EFFECT OF FIBRE ORIENTATION	KAZI A.M., RAMASASTRY D.V.A., WADDAR S., SHAIKH T.M., TAMBOLI A.A., SHAIKH S.A.M.	INTERNATIONAL JOURNAL OF VEHICLE STRUCTURES AND SYSTEMS	2021
87	STUDY ON VIBRATION CONTROL IN INDIAN TRACTORS	SUDHEER N., RAMASASTRY D.V.A.	INTERNATIONAL JOURNAL OF VEHICLE STRUCTURES AND SYSTEMS	2021
88	EXPERIMENTAL INVESTIGATION OF ROLE OF PARTICLES SIZE AND CUTTING PASSES IN ABRASIVE WATERJET MACHINING PROCESS ON TITANIUM ALLOY (TI–6AL–4V) USING TAGUCHI’S METHOD	UMANATH K., DEVIKA D., RASHIA BEGUM S.	MATERIALS AND MANUFACTURING PROCESSES	2021
89	ENHANCING PRODUCTIVITY OF V-TROUGH SOLAR WATER HEATER INCORPORATED FLAT PLATE WICK-TYPE SOLAR WATER DISTILLATION SYSTEM	MURUGAN M., SARAVANAN A., MURALI G., KUMAR P., REDDY V.S.N.	JOURNAL OF HEAT TRANSFER	2021
90	OPTIMIZATION OF MATERIAL REMOVAL RETE OF AA6086T6 USING TAGUCHI BASED REGRESSION MODEL	TAMILOLI N., VENKATESAN J., KUMAR T.S.	ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING	2021
91	IMPROVING PLATE-TYPE HEAT EXCHANGER THERMAL PERFORMANCE WITH ALUMINA-TITANIA HYBRID SUSPENSIONS: AN IN-DEPTH PERFORMANCE EVALUATION	ATUL BHATTAD	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2021
92	SUSTAINABLE NANOMATERIALS SYNTHESIS FOR EFFICIENT TOLUIDINE BLUE DYE REMOVAL FROM WATER	V.L. MANGESH	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2021
93	MAGNETOHYDRODYNAMIC FLOW OF CASSON AND CARREAU FLUIDS THROUGH A POROUS MEDIUM WITH VARIABLE THERMAL CONDUCTIVITY IN THE CONTEXT OF SUCTION OR INJECTION.	SEKHARA PRASAD	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2021
94	EXPLORING THE IMPACT OF VARIABLE TEMPERATURE AND CONCENTRATION ON RADIATIVE CHEMICALLY REACTIVE MAGNETOHYDRODYNAMIC VISCOELASTIC FLUID FLOW ACROSS A MOVING POROUS PLATE.	SEKHARA PRASAD	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2021
95	COMPUTATIONAL METHODS FOR SOLVING TIME-DEPENDENT MAGNETOHYDRODYNAMIC FLOW AND HEAT TRANSFER OVER A SURFACE THAT EXTENDS, CONSIDERING SUCTION OR INJECTION	T TARUN TEJA,	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2021
96	EFFECTS OF HEAT AND MASS TRANSFER ON MAGNETOHYDRODYNAMIC (MHD) CASSON FLUID FLOW IN A STRETCHING PERMEABLE VESSEL CONTAINING BLOOD.	T TARUN TEJA,	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2021
97	INFLUENCE OF THERMAL AND SOLUTE TRANSPORT ON MAGNETOHYDRODYNAMIC FLOW OVER, AN INCLINED POROUS PLATE IN THE PRESENCE OF A CHEMICAL REACTION.	M SATISH	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2021
98	EXPLORATION OF MAGNETOHYDRODYNAMIC (MHD) MIXED CONVECTIVE FLOW OVER A, VERTICAL POROUS SURFACE, ACCOUNTING FOR VISCOUS DISSIPATION.	M SATISH	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2021
99	NUMERICAL MODELING OF CASSON FLUID FLOW WITH MAGNETOHYDRODYNAMICS (MHD), OVER AN INCLINED POROUS STRETCHING SURFACE FEATURING VARIABLE PROPERTIES.	M SATISH	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2021
100	INVESTIGATING THE INFLUENCE OF HEAT RADIATION ON MHD VISCOELASTIC NANOFLUID, FLOW OVER A STRETCHING SHEET WITH HEAT SOURCE AND SLIP CONDITIONS: A NUMERICAL, ANALYSIS.	K SAIKUMA	INTERNATIONAL JOURNAL OF FOOD AND NUTRITIONAL SCIENCES (IJFANS)	2021
101	ALTERATION IN THE FORMING CHARACTERISTICS OF IN-SITU AL TIC COMPOSITES	G.L. DUTTA	Asiatic Society of Mumbai	2021
102	NAVIGATING COMPLEXITIES: CHALLENGES IN THE MANUFACTURE AND MACHINING OF HYBRID ALUMINIUM METAL MATRIX COMPOSITES	KAMMULURI. BABURAJA	Asiatic Society of Mumbai	2021
103	NUMERICAL SIMULATIONS AND EXPERIMENTAL VALIDATION ON LBW BEAD PROFILES OF TI-6AL-4V ALLOY	MOOLI H., SEERAM S.R., GOTETI S., BOGGARAPU N.R.	PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY	2021
104	REVISITED THE CRITICAL LOAD ASSESSMENT OF HUANG ET AL. ON WILLEMS TESTED BECK COLUMN	JAKKANA P.P., BOGGARAPU N.R., BODANAPU M., VENKATA A.R.B., CHERUKURI N., YEDDALA H.	PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY	2021
105	EXPERIMENTAL AND THERMAL INVESTIGATION WITH OPTIMIZATION ON FRICTION STIR WELDING OF NYLON 6A USING TAGUCHI AND MICROSTRUCTURAL ANALYSIS	KUMAR G.S.V.S., KUMAR A., RAJESH S., CHEKURI R.B.R., SUNDARAMURTHY V.P.	ADVANCES IN MECHANICAL ENGINEERING	2021
106	DESIGN OF REAL TIME EFFICIENT SUN TRACKING SYSTEM FOR SMART IRRIGATION USING RASPBERRY PI	KISHORE KUMAR K., RISHI KANTH N., RASIDHAR L., SRINATH A.	INTERNATIONAL JOURNAL OF SYSTEMS ASSURANCE ENGINEERING AND MANAGEMENT	2021
107	MECHANICAL, LOW VELOCITY IMPACT, FATIGUE AND TRIBOLOGY BEHAVIOUR OF SILANE GRAFTED ARAMID FIBRE AND NANO-SILICA TOUGHENED EPOXY COMPOSITE	DHARMAVARAPU P., REDDY M.B.S.S.	SILICON	2021
108	VIBRATION AND ACOUSTIC CHARACTERISTICS OF ALUMINIUM SILICON CARBIDE METAL MATRIX COMPOSITE UNDER UNIFORM AND NON UNIFORM THERMAL ENVIRONMENT	BABURAJA K., SUBBAIAH K.V., ARUNKUMAR M.P., BHAGAT V.S., REDDY R.K.K.	SILICON	2021
109	INVESTIGATION OF ABNORMAL COMBUSTION TENDENCY FOR CI ENGINE IN DUAL FUEL MODE OPERATION	KOLI S.R., RAO Y.V.H., KALE S.A.	INTERNATIONAL JOURNAL OF ENERGY, ENVIRONMENT AND ECONOMICS	2021
110	INCORPORATION OF TAGUCHI APPROACH WITH CFD SIMULATIONS ON LASER WELDING OF SPACER GRID FUEL ROD ASSEMBLY	SATYANARAYANA G., NARAYANA K.L., NAGESWARA RAO B.	MATERIALS SCIENCE AND ENGINEERING B: SOLID-STATE MATERIALS FOR ADVANCED TECHNOLOGY	2021
111	EXPERIMENTAL INVESTIGATION AND OPTIMIZATION ON FRICTION STIR WELDING OF NYLON 6A USING TAGUCHI AND ANOVA WITH MICROSTRUCTURAL ANALYSIS	KUMAR G.S.V.S., KUMAR A., RAJESH S., CHEKURI R.B.R., ADIGO A.G.	ADVANCES IN MATERIALS SCIENCE AND ENGINEERING	2021
112	STUDY OF LOW COMPRESSION RATIO ON THE PERFORMANCE OF DIESEL ENGINE IN DUAL FUEL OPERATION WITH DIFFERENT FLOW RATES OF ACETYLENE	RAJARAM KOLI S., HANUMANTHA RAO Y.V.	FUEL	2021
113	EXPERIMENTAL EVALUATION OF DIESEL ENGINE POWERED WITH WASTE MANGO SEED BIODIESEL AT DIFFERENT INJECTION TIMINGS AND EGR RATES	RAMI REDDY S., MURALI G., AHAMAD SHAIK A., DHANA RAJU V., SREEKARA REDDY M.B.S.	FUEL	2021
114	ANALYTICAL STUDIES AND NUMERICAL PREDICTIONS OF STRESSES IN SHEAR JOINTS OF LAYERED COMPOSITE PANELS FOR AEROSPACE APPLICATIONS	KRISHNADASAN C.K., SHANMUGAM N.S., SIVASUBRAMONIAN B., NAGESWARA RAO B., SURESH R.	COMPOSITE STRUCTURES	2021
115	EFFECT OF REFLECTING MATERIAL ON CPC TO IMPROVE THE PERFORMANCE OF HYBRID GROUNDWATER SOLAR DESALINATION SYSTEM	KEDAR S.A., BEWOOR A.K., MURALI G., KUMAR R., SADEGHZADEH M., ISSAKHOV A.	INTERNATIONAL JOURNAL OF PHOTOENERGY	2021
116	CHARACTERIZATION OF ROSELLE FIBER COMPOSITES FOR LOW LOAD BEARING STRUCTURES	KAZI A.M., DEVIKA D., WADDAR S., D. V. A. R.	POLYMER COMPOSITES	2021
117	HEAT TRANSFER PERFORMANCE OF UNI-DIRECTIONAL AND BI-DIRECTIONAL LID-DRIVEN CAVITIES USING NANOPARTICLE ENHANCED IONIC LIQUIDS (NEILS)	NIMMAGADDA R., CHERECHES E.I., CHERECHES M.	INTERNATIONAL JOURNAL OF THERMOPHYSICS	2021
118	ANALYSIS OF SISAL FIBER WAVINESS EFFECT ON THE ELASTIC PROPERTIES OF NATURAL COMPOSITES USING ANALYTICAL AND EXPERIMENTAL METHODS	PRASANTHI P.P., BABU K.S., NIRANJAN KUMAR M.S.R., KUMAR A.E.	JOURNAL OF NATURAL FIBERS	2021
119	APPLICATION OF TAGUCHI AND RSM PARAMETERS ON SURFACE ROUGHNESS AND MATERIAL REMOVAL RATE OF AA6082T6	MUGUTKAR H., TAMILOLI N.	JOURNAL OF PHYSICS: CONFERENCE SERIES	2021
120	DEVELOPMENT AND VALIDATION OF AN EXPERT SYSTEM FOR LUBRICANT BASED PREDICTIVE MAINTENANCE OF MACHINERY	REDDY I.A., RAMANA K.V.	JOURNAL OF PHYSICS: CONFERENCE SERIES	2021
121	EX SITU TRIBOLOGICAL AND ELECTRO-CHEMICAL ANALYSIS OF ALUMINIUM	REDDY Y.P., NARAYANA K.L., MALLIK M.K.	JOURNAL OF PHYSICS: CONFERENCE SERIES	2021
122	OPTIMIZATION OF MULTIPLE QUALITY CHARACTERISTICS FOR END MILLING UNDER DRY CUTTING ENVIRONMENT USING DESIRABILITY FUNCTION	SARATH V.V.N., TAMILOLI N.	JOURNAL OF PHYSICS: CONFERENCE SERIES	2021
123	EXPLORING THE SPECTRAL ANALYSIS OF STRUCTURAL AND OPTICAL CHARACTERISTICS IN NANOCOMPOSITE POWDERS SYNTHESIZED VIA MECHANICAL METHODS, CONTAINING TIO2 AND V2O5	K. S. MANIKANTA	Asiatic Society of Mumbai	2021
124	GREEN SYNTHESIS OF SILVER NANOPARTICLES FROM MANGIFERA INDICA LEAVES: A SUSTAINABLE APPROACH FOR DENTAL RESTORATION AND ANTIBACTERIAL APPLICATIONS	T. VIJAYA KUMAR	Asiatic Society of Mumbai	2021
125	ASSESSMENT OF THE PERFORMANCE OF A DIESEL ENGINE UTILIZING PREHEATED BIO-DIESEL ENHANCED WITH ADDITIVES	R B V MURALI	Anvesak	2021
126	DETERMINATION OF CORROSION RESISTANCE PROPERTIES OF AL-SIO2 COMPOSITE MATERIAL	VELAVAN K.; MUTHUKRISHNAN T.; SRINIVASAN T.; SETHUVELAPPAN P.; RAMANAN N.	JOURNAL OF PHYSICS: CONFERENCE SERIES	2021
127	ENHANCING SUPPLEMENTARY CEMENTITIOUS MATERIALS WITH GLASS FIBERS: A COMPREHENSIVE EXPERIMENTAL STUDY	DURGA CHAITANYA KUMAR JAGARAPU	Anvesak	2021

Publications

Publications - 2025

Publications - 2024

Publications - 2023

Publications - 2022

Publications - 2021