| S.No | Name(s) of the Author | Title | National / International | Conf/Jur Name | Year |
|---|
| 1 | Kotaiah, K.R., Srinivas, J. | Dynamic analysis of a turning tool with a discrete model of the workpiece | NAT | Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering | 2010 |
| 2 | Rao, Y.V.H., Voleti, R.S., Raju, A.V.S., Reddy, P.N. | The effect of cottonseed oil methyl ester on the performance and exhaust emissions of a diesel engine | INT | International Journal of Ambient Energy | 2010 |
| 3 | Srinath, A. | Laboratory design concepts for effective utilization of resources and obtaining greater efficacy | INT | International Journal of Emerging Technologies in Learning | 2010 |
| 4 | Kotaiah, K.R., Babu, K.J., Srinivas, K. | The impact of cutting conditions on cutting forces and chatter length for steels and Aluminium | INT | Journal of the Institution of Engineers | 2010 |
| 5 | Kotaiah, K.R., Srinivas, J., Babu, K.J | Prediction of optimal stability states in inward-turning operation using genetic algorithms | INT | International Journal of Machining and Machinability of Materials | 2010 |
| 6 | Kotaiah, K.R., Srinivas, J., Babu, K.J., Srinivas, K | Prediction of optimal cutting states during inward turning: An experimental approach | INT | Materials and Manufacturing Processes | 2010 |
| 7 | Srinath A | Laboratary Design concepts for effective utilization of resources and obtaining greater efficacy | INT | International Journal of Emerging Technologies in Learning | 2010 |
| 8 | B Surekha
V R Pandu
M B Parappagoudar
K Shyam Prasad | Modeling of high speed finish milling process using spot computing | INT | Journal of modeling, simulation and scientific computing | 2010 |
| 9 | K Rama Kotaiah
J Srinivas
K.J Babu
A V S Ramprasad | Stability analysis of turning the continious work piece model | INT | STROJNICKY CASOPIS (Russian Journal) | 2010 |
| 10 | Y V Hanumantha Rao
Ram Sudheer Voleti
P Nageswara Reddy
A V Sitarama Raju | Jatropha oil Methylester and blends used an alternative fuel in diesel engine | INT | Journal of Thermal Sciences | 2010 |
| 11 | Y.V.Hanumantha Rao
Ram Sudheer Voleti
A V Sitaramaraju
P Nageswara Reddy | Effect of cotton seed oil methyl ester on the performance and exhaust emissions of a Diesel engine | INT | International journal of Ambient Energy | 2010 |
| 12 | M Sekar
J Srinivas
K .Ramakotaiah
S H Yang | Stability analysis of turning process with toil –stock support work piece | INT | Journal of Advanced
Manufacturing Process | 2010 |
| 13 | A.Srinath
A Jagadeesh | Rating and selection of kinematic linkages for manipulators consideration of parallelism and number of loops | INT | International Journal of The open Mechanical Engineering Journal | 2010 |
| 14 | K. Rama Kotaiah
J Srinivas
K J Babu
K Srinivas | Prediction of optical cutting states during inward turning : An experimental approach | INT | Materials and Manufacturing Processes | 2010 |
| 15 | K. Rama Kotaiah
J Srinivas
| Dynamic analysis of turning tool with a Discrete model of the work piece | INT | Journal Engineering Manufacturing Process | 2010 |
| 16 | Srinath A, Jagadeesh A | Design steps for mems based gas turbine modeling and analysis using fem | INT | International Journal
of Applied Engineering
Research | 2011 |
| 17 | Kotaiah, K.R., Srinivas, J. | Study of tool dynamics with a discrete model of workpiece in orthogonal turning | INT | International Journal of Machining and Machinability of Materials | 2011 |
| 18 | Srinath, A., Rao, C.V.S., Jagadeesh, A. | Genetic algorithm based hamming number technique for detection of isomorphism in planetary gear trains | INT | International Journal of Applied Engineering Research | 2011 |
| 19 | Sobha, V.V., Vasudeva, R.Y., Ramakrishna, K., Hema Latha, K. | Non-darcy mixed convection with thermal dispersion in a saturated porous medium | INT | Journal of Heat Transfer | 2012 |
| 20 | Venkateswarlu, K., Kumar, K.V., Murthy, B.S.R., Subbarao, V.V. | Effect of exhaust gas recirculation and ethyl hexyl nitrate additive on biodiesel fuelled diesel engine for the reduction of NO x emissions | INT | Frontiers in Energy | 2012 |
| 21 | Ravi Prakash Babu, K., Durga Prasad, G. | Crack detection in beams from the differences in curvature mode shapes | NAT | Journal of Structural Engineering (India) | 2012 |
| 22 | G.Yedukondalu, A.Srinath | Mechanical chest compression with a medical parallel manipulator for cardiopulmonary resuscitation | INT | International Journal of Medical Robotics & Computer Assisted Surgery | 2014 |
| 23 | Mr. P.N.V.Bala Subramanyam | Strenth improvement of welded joint by using random vibrations | INT | ARPN JUR of engineering and applied sciences | 2016 |
| 24 | Dr. Md. Abid Ali | Effects of impingement of particle velocity temperature on the erosive wear behaviour of jute/E-glass fiber reinforced polymer composites | NAT | Indian JUR of science and technology | 2016 |
| 25 | Dr. K. Venkata Ramana | Effect of deep cryogenic treatment on tribological behavior of D2 steel | INT | An experimental investigation, Science Direct | 2016 |
| 26 | Mr. K V Durga Rajesh | Modified grouping efficacy and new average measure fexibility : Perfomance measuring parameters for cell formation applications | INT | ARPN JUR of engineering and applied sciences | 2016 |
| 27 | Mr. A. Eswara Kumar | Random vibration analysis of mechanical hardware of flight data recorder | INT | ARPN JUR of engineering and applied sciences | 2016 |
| 28 | DR.T.V.Rao | CFD analysis on heat transfer enhancement in horizontal tube forced convection with inserts | INT | | 2016 |
| 29 | Dr. T. Babu Rao | Optimizing machining parameters of wire-EDM process to cut Al7075/SiCp composites using an integrated statistical approach | INT | Advances in Manufacturing | 2016 |
| 30 | Dr. S. Srinivas Rao | Automatic recognition of internal featuresof axisymmetric parts from 2-D images | NAT | Indian JUR of science and technology | 2016 |
| 31 | Dr. K. Venkata Ramana | Effect of heat treatments on fatigue failure and fracture toughness of various tool steels | INT | INT JUR of Current Engineering and Technology | 2016 |
| 32 | Mr. K. Someswara Rao | Simulation and Analysis of Suspension System of Formula-1 Vehicle under Dynamic Conditions by using CAD Tools | NAT | Indian JUR of Science and Technology | 2016 |
| 33 | Dr. K. Venkata Ramana | Optimisation of Micro air vehicle air foil | INT | INT JUR of research In Engineering and Technology | 2016 |
| 34 | Dr. K. Venkata Ramana | Optimisation of Micro air vehicle air foil for traffic monitoring application | INT | INT JUR of Engineering Science and Computing | 2016 |
| 35 | Dr. K. Venkata Ramana | Analysis of MR Dampersfor quarter and half car suspension system of a roadwayvwhicle | INT | international journal of vehicle structures and systems | 2017 |
| 36 | Dr. B. Nageswara Rao | Micro Structural evolution and constitute relationship of M350 grade maraging steel during hot deformation | INT | Journal of materials engineering and performance | 2017 |
| 37 | Dr. B. Nageswara Rao | Thermal properties of AL2o3-water nano fluids to examine heat transfer enhancement in heat exchanger | INT | International journal of control theory and application | 2017 |
| 38 | Dr. B. Nageswara Rao | Performance of AFDC AND CFDC boilers in thermal powerplants | INT | Journal of control theory and application | 2017 |
| 39 | Dr. B. Nageswara Rao | Essence of the waste heat recover in process industries | INT | Journal of control theory and application | 2017 |
| 40 | Mr. K. Saisarath | Coiled tube heat exchanger | INT | Alexandria Engineering Journal | 2017 |
| 41 | Dr. Mithilesh Kumar Dikshit | Modeling and application of response surface optimization to optimize cutting parameters for minimizing cutting forces and surface roughness in high speed ball end milling of AL2014-T6 | INT | Journal of the Brazilian society of mechanical science and engineering | 2017 |
| 42 | Dr. A. Srinath | Optimum Material Selection to Prosthetic Leg through Intelligent Interface of RSM and FEA | INT | Materials Today Proceedings | 2017 |
| 43 | Chakravarthi K.V.A., Koundinya N.T.B.N., Narayana Murty S.V.S., Sivakumar D., Nageswara Rao B. | Optimization of Hot Workability and Control of Microstructure in CF250 Grade Cobalt-Free Maraging Steel: An Approach Using Processing Maps | INT | Metallography, Microstructure, and Analysis | 2018 |
| 44 | Chandramohan D., Ravikumar L., Sivakandhan C., Murali G., Senthilathiban A. | Review on Tribological Performance of Natural Fibre-Reinforced Polymer Composites | INT | Journal of Bio- and Tribo-Corrosion | 2018 |
| 45 | Dama K.K., Srinivasulu, Sai T., Swaroop, Dileep | Design for crashworthiness of an automotive sub-system using cae techniques | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 46 | Dama K.K., Surya S., Babu C., Pavan, Kiran R. | Modal analysis of an automotive subsystem using cae techniques | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 47 | Gudala M., Banerjee S., Rao T R.M., Naiya T.K., Mandal A. | The effect of a bio additive on the viscosity and the energy requirement on heavy crude oil flow | INT | Petroleum Science and Technology | 2018 |
| 48 | Gupta S., Datla S.V., Sekhar C.P., Shareef N.A. | An experimental investigation on a36 carbon steel in submerged arc welded joints | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 49 | Gupta S., Karanam N.K., Konijeti R., Dasore A. | Thermodynamic Analysis and Effects of Replacing HFC by Fourth-Generation Refrigerants in VCR Systems | INT | International Journal of Air-Conditioning and Refrigeration | 2018 |
| 50 | Hanumantha Rao Y.V., Jamuna Rani G., Sri Krishna Kalyan B., Avinash V., Narendra C.H., Ravi Kiran I. | Experimental investigations on performance and emission characteristics of a direct injection diesel engine using canola oil biodiesel with exhaust gas recirculation (EGR) | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 51 | Jamuna Rani G., Hanumantha Rao Y.V., Balakrishna B. | Investigation of fuel injection pressure impact on ci engine performance and emissions using biodiesel blend with alumina nano additives | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 52 | Konda J.R., Madhusudhana N.P., Konijeti R. | MHD mixed convection flow of radiating and chemically reactive Casson nanofluid over a nonlinear permeable stretching sheet with viscous dissipation and heat source | INT | Multidiscipline Modeling in Materials and Structures | 2018 |
| 53 | Kumar G.N.S., Srinath A. | Exploration of accelerating moving walkway for futuristic transport system in congested and traffical areas | INT | Journal of Advanced Research in Dynamical and Control Systems | 2018 |
| 54 | Kumar P.S., Srikar C., Reddy T.S.K., Babu K.V., Prakash T.S. | Design and construction of a reactive type muffler for a formula student vehicle | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 55 | Kuppusamy V., Sankerlal S. | Performance and emission characteristics of cashew nut shell pyrolysed oil – waste cooking oil with diesel fuel in a four stoke di diesel engine | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 56 | Kushnoore S., Anoop Varma G., Akhil K., Jathin Ch., Munish Reddy M. | Experimental investigation on mechanical behaviour of cenosphere reinforced epoxy composites | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 57 | Loveswara Rao B., Prema Kumar P.S. | Mitigation of unbalanced voltage sags and swells of power system in utility side by using Sen Transformer | INT | International Journal of Engineering and Technology(UAE) | 2018 |
| 58 | Madhukar V., Narasimha Rao K.V., Kamitkar N.D. | An investigation on thermo-hydraulic performance of shell and tube heat exchanger with recycles | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 59 | Mahendra Kumar Reddy K., Bhargava Sai P., Srikanth D., Dileep M., Teressa T. | CFD simulation and optimization of power consumption by using nanofluids | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 60 | Manikanta P., Reddy B.V.R., Kumar M.S., Chaitanya M., Sushanth A.D. | Friction stir processed AA6063 with B4C - Graphite hybrid surface composite and its mechanical behaviour | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 61 | Metta V.R., Konijeti R., Dasore A. | Thermal design of spiral plate heat exchanger through numerical modelling | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 62 | Veeranjaneyulu K., Venkateswar Rao T. | A review on diesel injectors modeling, spray and cavitation | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 63 | Venkatesulu M., Sambaiah C.H. | Modelling and analysis of static and dynamic of connecting lugs and mechanical bracket using abaqus | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 64 | Vijaya Kumar T., Sai Krishna P.S.B., Uday Kumar P., Avinash M.V.B., Ramsudeesh T. | Sintering of iron powder mixtures and determining their mechanical properties | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 65 | Vivek G., Imran M., Naveen P., Vineeth A.V., Rao B.N. | Biaxial gain assessment on flawed cylindrical pressure vessels | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 66 | Yedukondalu G., Patnaik S., Venkatesh P.L., Jagadeesh S.S. | Chest compression with 2-DOF parallel manipulator for cardiopulmonary resuscitation | INT | International Journal of Engineering and Technology(UAE) | 2018 |
| 67 | Murali G., Sandeep G., Hari N., Praveen M., Neeraj B. | Experimental studies on solar aluminium can air heater with and without latent heat storage | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 68 | Damarla V., Chakradhar R., Abhishek N.S.D., Sai Kumar T.J.V.T.P., Bala Subramanyam P.N.V. | CFD analysis of back pressure on royal enfield exhaust pipe | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 69 | Dharmendra B.V., Bhuvaneswari G., Krishna V.M.S., Kumar D.S., Avinash T.G. | EFfect of abrasive material on surface roughness in an abrasive jet machining (AJM) | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 70 | Diwakar G., Dileep R., Satya Nikhit P., Venkata sai N.H.S., Bala Krishna A. | Diagnosis of gearbox fault using acoustic signal | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 71 | Durga Rajesh K.V., Krishna Akhil G., Teja Kumar A., Vivek K., Radha Krishna B. | An effective similarity based sheep flock heredity algorithm to anticipate number of cells | INT | Journal of Advanced Research in Dynamical and Control Systems | 2018 |
| 72 | Murthy A.S.R., Ram Y.K.V.P., Krishna K.S. | Fault diagnosis of pump-motorset by using condition monitoring and iot technique | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 73 | Murty A.S.R., Satyanarayana M., Devi Vara Prasad I. | Compressor health monitoring using IOT | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 74 | Murty A.S.R., Teja K., Naveen S. | Lathe performance monitoring using iot | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 75 | Narayana K.L., Sandeepn V.R.K., Raghavendra T., Hari Krishna V., Siva Shankar A. | Condition monitoring of lubricants using wear debris analysis | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 76 | Padhi S.K., Kumar M., Srikanth M., Aditya S.K.S., Rahul | Thermal analysis on friction stir welded aluminum plates | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 77 | Panjagala H., Rohit Madhukar E.L.N., Ravi Kiran I., Shashank V., Bharadwaj S.V. | Aerothermodynamic topology optimization of hypersonic re-entry vehicle with aerospike by using CFD | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 78 | Parthiban R., Sakthivel R., Jetti S. | Fabrication and study of hardness behaviour on gamma irradiated ultra-high molecular weight polyethylene (UHMWPE) plate | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 79 | Patle B.K., Parhi D.R.K., Jagadeesh A., Kashyap S.K. | Matrix-Binary Codes based Genetic Algorithm for path planning of mobile robot | INT | Computers and Electrical Engineering | 2018 |
| 80 | Arunkumar M.P., Pitchaimani J., Gangadharan K.V., Leninbabu M.C. | Vibro-acoustic response and sound transmission loss characteristics of truss core sandwich panel filled with foam | INT | Aerospace Science and Technology | 2018 |
| 81 | Baburaja K., Rao T.B., Ganapathy R.S., Yadavalli A. | PArametric modeling and optimization of kerf width during wedm of al359/sicp composite | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 82 | Dutta O.Y., Nageswara Rao B. | Investigations on the performance of chevron type plate heat exchangers | INT | Heat and Mass Transfer/Waerme- und Stoffuebertragung | 2018 |
| 83 | Eswara Kumar A., Krishna Santosh R., Ravi Teja S., Abishek E. | Static and Dynamic Analysis of Pressure Vessels with Various Stiffeners | INT | Materials Today: Proceedings | 2018 |
| 84 | Eswara Kumar A., Navuri K., Manideep K., Priyanka M. | Effect of Thermal Environment on Buckling of Thick Cylinder Subjected to Combined Axial Compressive and External Pressure loads | INT | Materials Today: Proceedings | 2018 |
| 85 | Ganna S., Konijeti R., Dasore A. | Comparative study of physical and chemical adsorbents with composite adsorbent pairs for application in adsorption refrigeration system | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 86 | Garikapati D., Pacharu R.K., Munukurthi R.S.S. | Diagnosis of Misalignment in Overhung Rotor using the K-S Statistic and A2 Test | INT | Journal of The Institution of Engineers (India): Series C | 2018 |
| 87 | Anup Kumar T., Rohit Rama Raju P., Vinay T., Mahesh Babu R. | Attenuation of acoustic noise from supersonic jet nozzle | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 88 | Aparna K., Ramakrishna K. | A review on mechanical losses and non-uniform expansion of fluid in a Scroll expander | INT | Journal of Mechanical Engineering Research and Developments | 2018 |
| 89 | Arun Kumar G., Naveen Y.D.S.S., Pavan Kumar G., Srinu Kameshwara Rao P., Siva Sai Manohar R. | Effect of thin film coating in arc welding of low carbon steel | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 90 | Arun Kumar G., Surya S., Santhosh Naidu G.S., Rohith P., Raghuram K. | Study of mechanical and metallurgical behaviour of hybrid aluminium composite | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 91 | Pradeep Kumar J., Lakshmi Ravuri V.S., Saritha B., Kanchikere J., Sreenivasulu T., Babu Rao G. | Scope for data enabled infrastructure in petrochemical industries: A solution to midstream operating challenges | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 92 | Prasad V., Sai R., Chakravarthy K.P.K., Ranganath L., Mandhala V.N. | Observations of spiking phenomenon in electron beam welded etp copper plates | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 93 | Raghav B.V., Mahesh S.P., Ram S.K., Kalyan L.G., Chakravarthy K.P.K. | Studies on electron beam welding of cucrzr alloy plate | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 94 | Raj K.A., Arunkumar M.P., Kanigalpula P.K.C., Karthikeyan M. | Tribological and vibrational characteristics of AISI 316L tested at elevated temperature and 600 Torr vacuum | INT | Defence Technology | 2018 |
| 95 | Ram Prasad A.V.S., Ramji K., Raghu Kumar B. | Study of wire-electrical discharge machining parameters of titanium alloy by using taguchi method | INT | International Journal of Engineering and Technology(UAE) | 2018 |
| 96 | Ramana K.V., Mallik K.S.K., Narasimhakalyan K., Mani Ratnam A., Prasanth Kumar G., Ravi Teja P. | Nano coatings as bearing liners-an experimental investigation | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 97 | Ramanujam T., Devai H.P., Gopi M., Shanmukh R., Chakravarthy K.P.K. | Porosity studies on electron beam welding of copper alloys | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 98 | Ramesh Kumar S., Sriram Kalyan H., Dhananjaya Kumar K., Dilip S. | Design and fabrication of autonomous robot for precision agriculture | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 99 | Ramya K., Koneru S., Santhosh Kumar R. | Multi variable optimization of surface grinding process using genetic algorithm | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 100 | Rao P.K.V. | Design of stair-climbing wheelchair using tri-wheel mechanism | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 101 | Rao P.K.V., Raghu Kumar B., Saiteja A., Srikar N.S.V., Sreenivasulu V., Adithya Prakash D. | Experimental investigation of thermal stability of carbon nanotubes reinforced aluminium matrix using TGA-DSC analysis | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 102 | Rao P.K.V., Raghukumar B., Sudheer Kumar B., Phanindra Swamy G., Ganga Raju Y., Khan P.S.A. | Investigation of flexural and impact strength of carbon nanotube reinforced AA7075 metal matrix | INT | International Journal of Engineering and Technology(UAE) | 2018 |
| 103 | Rao T.B. | An Experimental Investigation on Mechanical and Wear Properties of Al7075/SiCp Composites: Effect of SiC Content and Particle Size | INT | Journal of Tribology | 2018 |
| 104 | Rao T.B., Goutham Karthik M.S.V.S., Raviteja Ch.K.S., RajaSekhar Reddy G., Sravan Kumar Reddy N., Shanmukha Prasad V. | Microstructural and mechanical properties of AL6061/GR composites processed though stir casting | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 105 | Rao T.B., Rama Rao P.V., Bala vamsi V., Surya Chandra Babu A., Venu P., Prince G.L. | Optimization of friction stir welding parameters during welding dissimilar aluminium alloys | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 106 | Rao T.B., Reddy K.D.K., Srikar K.B., Krishna M.P., Kumar Ch.P. | SIMULTANEOUS OPTIMIZATION OF µ-EDM PARAMETERS FOR MACHINING INCONEL 718 SUPER ALLOY | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 107 | Rao T.B., Vamsi P.K., Ram D.S., Jagadeesh M., Pilli V., Ramarao P.V. | Experimental investigation on peak temperature and tensile strength during plasma arc welding of ss-316 | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 108 | Rao T.B., Venkata Sai Prem K., Yashika N., Chevvakula S., Nalli V., Prasad V.S. | Microstructural and mechanical properties characterization of Al6061/nano TICP composites fabricated through stir casting | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 109 | Raveendranath R., Santhosh kumar R., Ramya K. | Flow characteristics of impinging jets | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 110 | Ravi Teja K.M.V., Naveen Kumar N., Sree Ram Sai K., Sai Teja P., Chaitanya Y. | Effect of fiber content variation on the strengths of the (Ladies finger) reinforced polyester composites with and without molybdic acid | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 111 | Sai Krishna Teja M., Narasimha Rao K.V., Pochont N.R. | Design, development and experimental evaluation of solar dryer | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 112 | Sandeep Kumar N.V.M., Pavankumar P., Srinivasarao M., Ajay Kumar M. | Thermal characterization of hybrid nano fluids | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 113 | Sangana V.R., Pattan S., Sai Charan V., Amarnadh M., Bharath P. | Design and optimisation of roller conveyor system | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 114 | Sanjay Krishna G.R., Pavan Kalyan K., Rama Krishna B., Nikhil Kumar P.V., Arun Singh B. | Multi-response optimization of wire-EDM process variables for machining process | INT | Journal of Advanced Research in Dynamical and Control Systems | 2018 |
| 115 | Sarath K.S., Govindha Rasu N., Sarath K.S., Hanumantha Rao Y.V. | Coiled tube heat exchangers - a review | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 116 | Saravanan G., Muthurajan K.G., Murali G., Arunkumar M. | A study of reversing valve performance in split type air conditioner | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 117 | Sasidhar Saketh A.V.S., Raja M., Nageswara Rao B. | CFD simulations and validation through test results of a shell and tube heat exchanger considering Al2O3-water as a testing fluid | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 118 | Sasidhar Saketh A.V.S., Raja M., Nageswara Rao B. | Selection of a suitable turbulent model in CFD codes to perform simulationsfor a circular microchannel heat exchanger | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 119 | Sathyaraj S., Venkatesan K., Srikanth J. | Fabrication of aluminium 6061- SiC-Al2O3 mmc and hmmc by strir casting technique and comparing the mechanical properties | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 120 | Satyanarayana G., Narayana K.L., Boggarapu N.R. | Numerical Simulations on the Laser Spot Welding of Zirconium Alloy Endplate for Nuclear Fuel Bundle Assembly | INT | Lasers in Manufacturing and Materials Processing | 2018 |
| 121 | Satyanarayana G., Narayana K.L., Nageswara Rao B. | Identification of Optimum Laser Beam Welding Process Parameters for E110 Zirconium Alloy Butt Joint Based on Taguchi-CFD Simulations | INT | Lasers in Manufacturing and Materials Processing | 2018 |
| 122 | Singh S., Pavan C., Raghavendra, Kumar L., Janjanam N. | Enhancement of refrigeration effect using flue gases from chimney | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 123 | Sivakandhan C., Murali G., Prabhu P.S. | An experimental study of updraft biomass gasifier using biofuels | INT | Ecology, Environment and Conservation | 2018 |
| 124 | Sivakumar P., Appalaraju P., Srikar C.H., Reddy T.S.K., Kumar Y.J., Babu K.V. | Steady state thermal analysis of continuous variable transmission with extended surfaces | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 125 | Somasundar A.V.S.S., Yedukondalu G., Subhani S.K., Azgar S.K., Srinivas Y., Ganneshwar G. | Mini paddy crop cutting and straw separation rover | INT | Journal of Advanced Research in Dynamical and Control Systems | 2018 |
| 126 | Sreekara Reddy M.B.S., Ratnam C., Rajyalakshmi G., Manupati V.K. | An effective hybrid multi objective evolutionary algorithm for solving real time event in flexible job shop scheduling problem | INT | Measurement: Journal of the International Measurement Confederation | 2018 |
| 127 | Sudhabindu B., Ramarao P.V., Uday Kiran C. | The effect of thermal cycling on the mechanical properties of jute fiber reinforced by E-glass fiber composites | INT | International Journal of Engineering and Technology(UAE) | 2018 |
| 128 | Suresh G., Narayana K.L., Kedar Mallik M., Srinivas V., Jagan Reddy G. | Processing & characterization of LENSâ„¢deposited Co-Cr-W alloy for bio-medical applications | INT | International Journal of Pharmaceutical Research | 2018 |
| 129 | Suresh G., Narayana K.L., Mallik M.K. | Bio-compatible processing of LENSTM DepositedCo-Cr-W alloy for medical applications | INT | International Journal of Engineering and Technology(UAE) | 2018 |
| 130 | Suresh G., Narayana K.L., Mallik M.K., Srinivas V., Reddy G.J., Gurappa I. | Electro chemical behaviour of lensâ„¢ deposited Co-Cr-W alloy for bio-medical applications | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 131 | Yedukondalu G., Thakare M., Anvesh V., Hokesh Reddy R., Cheetri A. | Scheduling and control of parts in FMS industry | INT | International Journal of Engineering and Technology(UAE) | 2018 |
| 132 | Chandramohan D., Ravikumar L., Sivakandhan C., Murali G., Senthilathiban A. | Review on Tribological Performance of Natural Fibre-Reinforced Polymer Composites | INT | Review on Tribological Performance of Natural Fibre-Reinforced Polymer Composites | 2018 |
| 133 | Konda J.R., Madhusudhana N.P., Konijeti R. | MHD mixed convection flow of radiating and chemically reactive Casson nanofluid over a nonlinear permeable stretching sheet with viscous dissipation and heat source | INT | Multidiscipline Modeling in Materials and Structures | 2018 |
| 134 | SAI SARATH KRUTHIVENTI, N. GOVINDHARASU
& Y. V. HANUMANTHA RAO | AN IDENTIFICATION OF THE BEST MIXTURE COMPOSITION FOR
THE JOULE-THOMSON REFRIGERATOR
OPERATING AT 90 K | INT | International Journal of Mechanical and Production
Engineering Research and Development | 2018 |
| 135 | Chakravarthi K.V.A., Koundinya N.T.B.N., Sarkar A., Narayana Murty S.V.S., Nageswara Rao B. | Optimization of hot workability and control of microstructure in 18Ni (M250 grade) maraging steel using processing maps | INT | Materials Performance and Characterization | 2018 |
| 136 | T. S.K., Ramanujam R., Vignesh M., Tamiloli N., Sharma N., Srivastava S., Patel A. | Comparative evaluation of performances of TiAlN, AlCrN, TiAlN/AlCrN coated carbide cutting tools and uncoated carbide cutting tools on turning Inconel 825 alloy using Grey Relational Analysis | INT | Sensors and Actuators, A: Physical | 2018 |
| 137 | Tanuja Alekhya K., Naveen Chandra D., Subhankar Reddy G., Nageswara Rao B. | Experimental stress analysis on a hydro-burst pressure tested high strength steel rocket motor casings | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 138 | Tirumala Sandeep T., Mani Bhushan K., Lalith Sai Kumar A., Satish kumar P., Sai Ram Prasad A. | Design and optimization of geometrical characteristics of helical spring using fusion 360 | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 139 | Balasubramanyam P.N.V., Harsha O.N.S., Raviteja C.K.S., Naveen S.S.S., Lalithadevi S.N. | Explicit impact analysis of modelled automotive bumper with distinct speeds | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 140 | Balasubramanyam P.N.V., Raviteja C.K.S., Shivamkumar, Lalithadevi S.N. | Design & improvement of diesel locomotive brake hanger | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 141 | Basha S.K., Kolli M., Jagannadha Raju M.V. | Parametric optimization of Edm on Hastelloy C-276 Using Taguchi L18 Technique | INT | International Journal of Engineering and Technology(UAE) | 2018 |
| 142 | Basha S.K., Raju M.V.J., Kolli M. | Experimental Study of Electrical Discharge Machining of Inconel X-750 Using Tungsten-Copper Electrode | INT | Materials Today: Proceedings | 2018 |
| 143 | Bharat Satya Kumar Y., Kalyan Chakravarthy Y., Paladagu R.P., Venkatesh R., Srinath A. | Development of force plate for prosthetic applications interfacing with internet of things | INT | International Journal of Engineering and Technology(UAE) | 2018 |
| 144 | Bhaskar D., Phani Ram M., Mahidhar Samba Reddy T., Sudheer Kumar D., Bala Subramanyam P.N.V., Naveen J. | Structural and thermal analysis of an automobile chassis subjected to impact load | INT | Journal of Advanced Research in Dynamical and Control Systems | 2018 |
| 145 | Bhuyan R.K., Kumar Akula P., Chivukula G.R., Sai B.M. | Comparative study of the machining characteristics of EN24 and hardened EN24 during cnc turning | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 146 | Bhuyan R.K., Rajiv B., Lekharaju K.A.N.V., SwathiKiran M., Kumar N., Naveen Gupta K.V.R. | Optimization of process parameters in cnc plane turning lathe using matlab | INT | International Journal of Mechanical Engineering and Technology | 2018 |
| 147 | Buddi T., Rao B.N., Singh S.K., Purohit R., Rana R.S. | Development and analysis of high density poly ethylene (HDPE) nano SiO2 and wood powder reinforced polymer matrix hybrid nano composites | INT | Journal of Experimental Nanoscience | 2018 |
| 148 | Bullibabu K., Ali M.A. | Production and characterization of low thermal conductivity clay bricks by admixture of bagasse and perlite | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 149 | Chaitanya C.H., Yechuri S., Ramakrishna K. | Experimental investigation of photovoltaic performance of silicon solar cell by using copper doped TiO2thin film | INT | International Journal of Mechanical and Production Engineering Research and Development | 2018 |
| 150 | Chakravarthi K.V.A., Koundinya N.T.B.N., Narayana Murty S.V.S., Nageswara Rao B. | Microstructure, properties and hot workability of M300 grade maraging steel | INT | Defence Technology | 2018 |
_Artboard.jpg)
